DOMA ES200E fault code and solutions
I often receive calls asking about the fault code of DOMA ES200E machine. In order to solve the problem, I will give a brief description of the fault code;
1. View methods:
When the LED is in reality E, press the SELECT button, and the LED will display a letter or number. Then press the minus button to check the next fault.
II. Fault codes and solutions
0 No fault
1 door jam setting program switch from "automatic" to "closed" position and then return to "automatic"
2 Electric lock setting program switch from "automatic" to "closed" position and then return to "automatic"
3 Program switch setting program switch from "automatic" to "off" position and then return to "automatic"
4 Electric Eye setting program switch from "automatic" to "off" position and then return to "automatic"
5 The encoder turns off the power supply and waits for 20 seconds to power on again
6 standby battery setting program switch from "automatic" to "off" position and then return to "automatic"
7 System and relay test power off, wait 20 seconds, power on again
8 emergency stop button release emergency stop button
9 learn fault setting program switch from "automatic" to "off" position and then return to "automatic"
A motor fault setting program switch from "automatic" to "off" position and then return to "automatic"
B Battery Test fault setting program switch from "automatic" to "off" position and then return to "automatic"
C Force test fault setting program switch to the "off" position until the force test is normal at the on position
D Motor overcurrent exceeds 30 seconds setting program switch from "automatic" to "off" position and then return to "automatic"
The above is only a fault code, which is only a reference for solving the problem. When a fault occurs in automatic door, external faults need to be carefully eliminated, such as whether the door leaf is running smoothly and whether the connection is falling off, in particular, check whether there are broken lines on the terminal block at the root of the controller.
Warm Reminder: code display E indicates that door body has a fault. Press the SELECT key to see what the fault code is! Pass or-see if there are any other faults. Check the instructions with the fault code!
