Method 1: Take down the yarn box directly. The yarn box is usually a kind of accessory with card stuck, which can be slowly shaken down by hand directly, just use a kitchen knife to insert it between the yarn box and the window,
Method 2: Rewinding invisible car window shade disassembly method:
Pull out the invisible car window shade handle slightly by 10 centimeters. Then slowly pull car window shade reel out of the house.
Some invisible car window shade accessories have a hook. You just need to pull the hook out first. The same is true.
Car window shade reel after taking it out. Then move out the aluminum alloy at the handle.
When taking it, be careful not to get stuck to the corners of the voile, causing voile to break.
Pull car window shade out when washing. After pulling it out, you can see a round tube inside the reel. Then just take a cloth and put it into reel.
Method 3:
First, remove the bottom slot, and you will see two slipping buckles. Remove the screws and slide them off, and then you will see the screws on the box. Remove the screws,
Method 4:
The spring reel car window shade is disassembled, cleaned, dried, and then installed. The order is opposite to that of disassembly. That is, install the top car window shade roll box first, fix the roll box screws, and then install the side groove, fix the screws at the lower end of the side groove, and finally gently press and buckle the lower bottom groove.
Method 5: disassembly and installation methods
1. The first step is to disassemble car window shade
Step 2: Remove window screen
Remove all clips on both sides, put them away, and finally clean them together.
After cleaning, dry
Mounting yarn
This step is the key. Pay attention to spring up after installation. It cannot be too tight or too loose.
Window screen installed and rolled
Installation and fixing
When installing, the pull-down rod is advanced, and the hidden box is installed later.
