High-Performance doors and windows are composed of profile system, heat insulation system, glass system, auxiliary material system, safety supporting system and CNC machining system. At present, the building energy consumption has accounted for 40% of the total energy consumption of the whole society in our country, while the energy consumption of doors and windows accounts for 45% ~ 50% of the building energy consumption and 15% ~ 20% of the total social energy consumption. China promises to reduce carbon dioxide emissions per unit of gdp by 40%-45% compared with 2005 by 202020. it can be seen that doors and windows are the main cause of building energy loss, the upgrading of building energy-saving doors and windows will be the general trend. European system doors and windows entered the Chinese market in the late 1990 s. Now the k value standard of European high-performance system doors and windows can reach 0.8, and its energy consumption is basically only 1/4 of that of Chinese building doors and windows.
Profile System:
Classic mature European standard structure design, large section, large wall thickness, design thickness and strength meet national standards. Wide outer frame material, fan material and pressure line in one go, clean design, no extra lines.
Luxury upgrade on the basis of septuple partition: fully automated glass adhesive, higher strength two-component structural adhesive + fan glass pad, three-glass two-cavity hollow glass, 0 heat conduction warm edge insulation strip, multi-cavity duckbill glue, HK type German Tylenol wind insulation strip, etc.
A big system, three structural support
Drainage structure: high and low hidden drainage design with integral waterproof design, more beautiful and durable when matched with yarn fan.
Mid-rise structure: plus mid-rise reinforced connectors, the mid-rise structure is unbreakable, and the profile structure is combined and strengthened.
Standard notch structure: referring to European technology and European standard hardware notch structure has stable performance and good interchangeability of hardware, so there is no need to worry about the replacement of hardware for after-sales maintenance.
Corner structure: PA laide system door and window corner glue injection connection structure, which is characterized in that, including horizontal frame profile, vertical frame profile and connection angle code,
The connection angle code is placed between the horizontal frame profile and the vertical frame profile, and is connected into a whole through the connection angle code, and the inner gap is filled with two-component glue.
It can significantly improve the connection strength of the door and window fan frame, and avoid a series of problems caused by the sinking of the door and window fan, such as difficulty in closing and lax sealing,
Improve the quality of processing and assembly by Broken Bridge aluminum doors and windows, prolong the service life of doors and windows fan body, make the corner position more solid and full, and combine 45 ° seamlessly to enhance the sealing performance.
Insulation System:
Effectively solve the three major problems of doors and windows, and carry out energy-saving and thermal insulation Systematization
Heat conduction: PCP03 adopts German Tylenol wind 25.3MM heat insulation strip, the energy saving effect is 35% less than 14.8MM heat insulation strip on the market, and the heat transfer system of window frame is reduced.
PCP04 adopts Taino wind 35.3MM wide heat insulation strip, which reduces the heat transfer coefficient of window frames on the market by 45% year-on-year.
Convection: multi-cavity insulation strip is adopted, and foam material with stable filling performance is filled in the cavity to reduce air and cut off convection heat transfer;
Radiation Heat Transfer: through the design of heat source and cold source insulation strip or foam filling material, the infrared special heat is broken, and the red radiation heat transfer is cut off.
Glass system:
Three-glass two-cavity Super soundproof performance, three-layer hollow, double the sound insulation effect. 5mm thick tempered glass, 12mm thick hollow layer, filled with inert gas, with double-Channel sealant, no resonance phenomenon, improve sound insulation.
The warm edge insulation strip used in high-performance doors and windows is an innovative product made of strength polypropylene and stainless steel. Compared with ordinary aluminum spacer strips in the past, its advantages are here:
1. The thermal conductivity of polypropylene material is close to 1/1000 of aluminum, which improves the thermal insulation performance of insulating glass edge and effectively prevents condensation.
2. The perfect combination of polypropylene and stainless steel ensures the water tightness and air tightness of hollow glass while the warm edge spacer has ultra-low thermal conductivity, thus ensuring the service life of hollow glass.
3. The thermal conductivity of stainless steel is 14.3 W/m. K, which is about 9% of the aluminum spacer. If considering that its wall thickness less than or equal to 0.2mm is only 1/2 of the aluminum metal spacer, its heat flux will be smaller.
4. Like inorganic material aluminum metal spacer, stainless steel spacer does not have the problems of UV resistance and high temperature aging resistance, and people do not have to worry about its water vapor penetration and air tightness, do not react with soft coating of off-line low-radiation glass;
5. Stainless steel spacer strip has excellent formability and can be processed into any shape of traditional aluminum spacer strip;
6. Insulating glass made of stainless steel spacer strips can adapt to different climatic conditions around the world, such as from the cold north and south pole to the hot equator;
Auxiliary material system:
Adhesive strip design: use well-known brand Haida adhesive strip, European standard conforms to EU DIN7863 European standard, long life and environmental protection. Luxury car grade EPDM foam strip, sealing, blocking heat transfer function.
Glass double-sided adhesive strip, scientific structure, glue-free design.
The profile structure uses the upper EPDM Styrofoam and the lower ethylene-propylene diene copolymer, the doors and windows are closed more tightly, the air tightness is excellent, the hardness is high, the assembly with the profile is tight, and it is not easy to loosen.
One kind of rubber strip can also realize two processes and two functions.
Security supporting system:
It is made of high-strength industrial plastic steel wire as the framework and high-quality inorganic nano materials as the coating. It is woven by German jet, without sliding or shrinking.
The mesh is dense, the wire diameter is only 0.22mm,PET material, the texture is as thin as paper wings, but as strong as steel wire. Delicate and smooth hand feeling, tear-proof, continuous folding, oil-free, non-stick gray,
Without any peculiar smell, refracting ultraviolet rays, the ventilation performance can reach 80-90%, and the service life is not less than 6 years.
Car window shade design-HD network
Skilled inorganic nano molecules are evenly fixed on the surface of voile, high precision screen weaving technology. 48 mesh number, PET material,
0.125MM wire diameter, 400 Micron opening effectively blocks the invasion of few mosquitoes, and has stronger ventilation and visual field effect.
Hardware configuration-sobing Ke hardware
The world's top doors and windows high-end imported hardware, standardized connectors.
The design of the handle without base not only provides a simple appearance, but also greatly facilitates the installation and replacement of the handle and the convenience of disassembly and assembly,
It provides the possibility for the end user to change. Hidden hinge good noise reduction performance: compared with surface-mounted hinge, it can reduce 3-4DB noise; The maximum load capacity is 200KG;
High corrosion resistance, neutral salt spray test can reach 240 hours; Adopt security anti-theft design, higher airtight water tightness; Three-gear adjustable,
Personalized is convenient for maintenance during future use. Safety and personalized design highlight the high-grade enjoyment of system doors and windows.
CNC machining system:
CNC automatic processing equipment, high precision numerical control technology in order to ensure that every processing link is flawless.
As a high-performance system, doors and windows not only save energy, but also protect the building structure and interior decoration structure from condensation water or rainwater naturally appearing in the air,
At the same time, it can create a healthy and comfortable environment below 30 decibels. PA laide high-performance system doors and windows, LoveU family members, and the earth to protect the future.
