In general, rail doors are usually divided into two types, one is light rail doors, which are characterized by light sliding and pulling, various styles, and can be designed according to ordinary sliding door styles, door frame and door panel materials are completely consistent with ordinary partition or closet doors.
Another is the giant rail door, which is characterized by the warm and firm door frame. Door body the overall effect is similar to solid wood door, but the service life and grade are only inferior to ordinary wooden doors, which are smooth to push and pull, and can be installed by buckle door lock. In life, the application rates of these two doors are basically the same.
1. There is a hanging wheel insert above the two sides of the door. The insert and the side of the door are flat, which is the key to remove the hanging rail sliding door. In fact, as long as you have mastered the tips, the lifting rail door is very easy to remove. If you look carefully, you can find that there is a hanging wheel insert on each side of the two sides, and the insert and the side of the door are flat. At that time, in order to be beautiful, the inserts may be pasted out, so as long as the decorative skin of the side corner is scraped off, you can obviously feel it, but be careful not to scratch the edges and corners.
2. After installation, sometimes it may be stuck in the decoration for beauty, so the decorative skin on the side should be scraped off a little. Be careful not to scratch the edges and corners, the appearance is damaged.
3. Then you can touch it with your hand and feel the seam, so that it can be disassembled. Generally, both sides of the open-mounted rail door can be removed. If it is concealed, first remove one side, then lift the door, then pull the door out and turn the door out, until the angle of pushing the door is not surprising.
Note:
The reason why the rail door needs to be removed, thousands of cases are because the installation effect is not good, and it needs to be reinstalled, so pay attention to the following points when installing.
If the space before and after the door frame is relatively narrow, it is not suitable to install the hanging rail sliding door.
When selecting the hanging rail, the hanging rail with better quality should be selected, so that when it is used, it can ensure the convenience of the hanging rail sliding door and reduce the noise during the use of the hanging rail sliding door.
The hanging rail with two doors is sliding door. During the installation process, the door cracks on both sides should be adjusted and aligned, so as not to make the hanging rail sliding door feel uncoordinated.
Lifting rail door disassembly procedure
1. In fact, remove the hanging rail screws on both sides of the upper end of the door and draw the hanging rail to both sides.
2. There is a card slot at the upper end of the door, the hanging rail is median Brown in the card slot, and the door is removed
3. The removal method of the two doors is the same. When installing the door, pay attention to the slot under the entry of fixed pulley cards on the ground, and then put the slide rail into the slot on the upper end of the door with screws.
As long as you have mastered the tips, the lifting rail door is very easy to remove. If you look carefully, you can find that there is a hanging wheel insert on each side of the door, and the insert and the side of the door are flat. At that time, in order to be beautiful, the inserts may be pasted out, so as long as the decorative skin of the side corner is scraped off, you can obviously feel it, but be careful not to scratch the edges and corners.
