If the door is too heavy, there are two situations. One is that the pulley is worn out (in order to achieve better mute effect, the current pulley is made of rubber), the other is orbital droop. These two situations will make the door Droop. If the door is not repaired as soon as possible, it will open and tighten.
You can open the track or change the pulley as follows:
(1) there is a screw on the top of the door side of the hanging rail sliding door to fix the slide rail. Remove the screws on both sides of the door and try to hold the door after raising it, use a screwdriver to forcibly slide the slide track out in the opposite direction of the track.
(2) at this time, you can observe whether the track is straightened. If the track straightens and springs back, it means that the track hardness is not enough to support the weight of the door. You can change it to a new track, or install the track up and down in reverse so that it can be solved.
(3) after separating out and track, check whether the pulley is worn out and deformed, remove the old one, replace it with a new pulley, and then find a way to install it back according to the original method.
(4) put the top rail into the pulley, cover plate, install hanging card, and make appropriate horizontal adjustment until it reaches the requirements. Finally, install the two doors, install the matching hardware accessories, observe whether the opening and closing are clear, without any resistance or inclination, and then fix all bolts and screws, the entire installation process is completed.
(5) attention should be paid to adjusting and aligning the door seams on both sides during installation, otherwise the whole hanging rail sliding door will not be coordinated.
Method 2:
You can open the track or change the pulley.
Note that when installing the hanging rail sliding door, it is necessary to ensure that the width of the two doors is left. In this case, when the front and back space is relatively small, you can still consider using the hanging rail sliding door. At the same time, you should also pay attention to whether the sliding door will produce relatively large noise during installation. Therefore, when choosing the hanging rail, the quality should be relatively good, so as not to bring inconvenience to future use.
There are two types of hanging rail sliding door.
1. Light rail door: it is easy to push and pull, and has various styles. It can be designed according to ordinary sliding door styles. The door frame and door panel materials are completely consistent with ordinary partition or closet doors.
2. Large rail door: the door frame is wide and thick, the door panel is thick, strong and firm, and the overall effect of door body is similar to solid wood door, but the service life and grade are better than ordinary wooden doors, and the sliding is smooth and smooth, and the installation can be buckle door lock.
