Precautions for installation of invisible door
1. Install the handle and lock on the side that does not need to be hidden. If you must press the handle on the hidden side, then choose the decorative handle. It is better not to install the door handle, but it is convenient to control the opening and closing of the door without the handle? The most reasonable way is to use multifunctional hydraulic hinge, hidden hinge, floor spring, touch pop-up device and door closer;
2. The key of invisible door is hydraulic hinge or hidden hinge, which not only rotates between connecting door and wall, but also has super weight capacity, so it is particularly important to choose hydraulic hinge or hidden hinge with hard and high quality materials.
3, door closer, make up for the defect of no handle use, it can avoid the damage of door panel or self-closing door by slow door set.
4. Floor spring is mainly used for invisible doors with 360-degree central axis rotation, and its stability is relatively stable.
5. Touch-type rebounder uses an open invisible door, which is unnecessary compared with the open door.
6. In order to keep the occasional indoor ventilation, you can press a door stopper, so that the door can be kept open, and families with permitted conditions can consider making a fresh air system.
7. Be sure to align the door panel with the wall outward. In the same horizontal plane, the transition area is smooth and unobtrusive, and the gap is narrow, like a complete wall.
1. How to install inner door hinge?
1. Preparation tools: before installing Hinge for inner door, prepare relevant tools, such as tape measure, horizontal ruler, pencil, screwdriver, Tapper and pistol drill.
2. Line drawing positioning: Generally, before installing the inner door hinge, the installer will mark the positioning first, and then use pistol drill or woodworking hole saw to punch the hinge mounting hole with a size of about 35mm on the door panel, with a depth of about 12mm.
3. Fixed hinge cup: fix the inner door hinge sleeve entry board with self-tapping screws in the hinge hole;
4. Fixed base: open the inner door hinge, insert and align the side plate, and fix the base with self-tapping screws;
5. Debugging effect: the opening and closing inner door is tested. Generally, the hinge can be adjusted in six directions and aligned up and down. The left and right sides of the two doors are moderate. The best effect for debugging the door is good, after the installation is closed inner door, the gap is about 2mm.
2. How many are the most suitable for inner door hinge installation?
When installing hinges for inner door, you must select the appropriate number of hinges according to the weight of the door leaf. Generally, for those with heavy doors such as solid wood door and solid wood composite door, it is more appropriate to install three hinges, but for Nick hardware tailored for TATA wooden doors, it generally only needs to install two. For example, the door leaves such as paint-free door and mould door are lighter. You only need to install 2 hinges everyday. In addition, when installing the hinge, the first hinge is generally installed at a position of about 400mm above the door leaf, and then the second and third hinge are installed according to the height of the door leaf.
