How to deal with air leakage in sliding window groove
1. First of all, the window is closed. As long as the coins at home are used, the thickness of the gap can be measured. Generally, the thickness of the coin is about 2mm. If the gap is just the size of a coin, it is OK to use 9X5mm for Burr edge banding, which is suitable for 2.5-4.5mm gap.
The gap here refers to the position of aluminum alloy edge and window frame edge
2. After the gap of the window is determined, the length of the window can be measured. At the same time, edge banding of the burrs of the same color and length can be selected according to the color of the window. Make sure that the window frame is right before pasting, which is more beautiful.
3. Uncover the glue on the back and paste the captured edge banding on the inside of the frame. After pasting, you must press it back and forth with your hands to fully bond the edge banding to the inside of the frame. After pressing, you can close the window, measure the gap size again and feel the effect.
4. Sliding window the installation Method of Edge banding is the same, but there is a slight difference between the middle paste edge banding. If you paste edge banding in the middle of the window, you need to open one window first, and open the other window a little more, at this time, you can see that the aluminum alloy window is fluted. Edge banding must be pasted on the smooth surface next to the groove. Do not paste it in the groove, and then align and press it.
Air leakage in window joints can be solved by sealing strips. The specific methods are as follows:
Material tools: Sealing Strip, scissors
1. Determine the air leakage position. The gap here takes the position of aluminum alloy edge and window frame edge as an example;
2. After the gap of the window is determined, select edge banding burrs of the same color and length according to the color of the window. Make sure that the window frame is right before pasting, which is more beautiful.
3. Uncover the glue on the back and paste the captured edge banding on the inside of the frame. After pasting, you must press it back and forth with your hands to fully bond the edge banding with the inside of the frame, after pressing, you can close the window and feel the effect.
