When the window screen is lifted up, the two sides of the window screen frame are bent inward or outward.
Turn it into an arc, which can reduce the relative height of window screen boxes, and then easily take out window screen boxes.
Generally, after the window screen frame is lifted upward, the buckle section inside will not exceed one centimeter.
In this way, the bending and radian of bending need not be too large.
Therefore, the window screen frame will not be deformed too much, nor will it affect the overall shape of the window screen frame. After all, the plastic frame has flexibility and resilience.
The summary is as follows.
Plastic steel or aluminium alloy sliding window: Grab car window shade and lift it up, first go out the lower side, then go out the upper side, and then remove it
Casement window: 1 invisible car window shade, which is the kind of scroll. There are screws on the four corners of the car window shade frame to the window frame, either inside or outside, just remove it with a plum screwdriver. 2 Ordinary car window shade is the kind of single fan, where the window frame is in contact with car window shade, there are bullet parts with car window shade, distributed on the four sides of car window shade, which can be broken by hand, break it to less than car window shade, then grab the car window shade and lift it up, first go out the lower side, then go out the upper side, and remove it. 3 Diamond Net car window shade, same as invisible car window shade, it is OK to remove the screws with a screwdriver.
