Dismantling plastic steel windows is very simple for door and window installers, but for those who are not engaged in the door and window industry, they do not know how to start, so how to disassemble plastic steel doors and windows?
Split car window shade: just push car window shade hard to get car window shade off.
Remove the lock and windproof block of the push and pull fan. Remove the cover on the push-pull fan: The cover is on the vertical material on the push-pull fan, and you need to pry the cover from bottom to top with a screwdriver.
Push sliding window fans to the top, just like the car window shade unloading method, you can also take them off. Remove the screws on the window frame, the window frame is fixed on the hole, and the four sides of the upper, lower, left and right are all fixed with screws.
Remove the window frame: After separating the fixing screws and glue on the window frame, the whole window frame can be taken off smoothly.
Method 2:
Step 1: Remove car window shade. This is the simplest, just push the car window shade hard, and the car window shade will be out of orbit, and then the car window shade can be taken down.
Step 2: remove the lock and windproof block of the sliding fan. To remove the push and pull fan, you need to remove the hook lock with a screwdriver first. Check whether there is a windproof block on the plastic steel window frame. If there is one, you need to remove it first.
Step 3: Remove the cover on the push and pull fan. The cover is on the vertical material of the push-pull fan. You need to use a screwdriver to pry the cover from bottom to top, and then break the cover with your hand.
Step 4: After the cover is removed, sliding window fans can be pushed hard, just like the car window shade unloading method.
Step 5: remove the screws on the window frame. The window frame is fixed on the hole, and the upper, lower, left and right sides are all fixed with screws. At this time, all the screws need to be removed.
Step 6: Use art knife to cut all the glue of the window frame. When the plastic steel window is installed, sealant or foaming agent is applied around the window frame. Therefore, when the window frame is removed, all the parts connected with the window frame should be cut and separated by art knife before the window frame can be removed.
Step 7: remove the window frame. After separating the fixing screws and glue on the window frame, the whole window frame can be successfully taken off. The whole process is not complicated, as long as you follow the steps, you will be able to successfully dismantle the plastic steel window.
