The previous window glass film for a long time and faded; Or when you want to redecorate the window, you will tear off the old window filming first. However, in the process of actual operation, it was found that many glass protector could not be completely torn off due to the long time that the window filming was pasted on the window. Then how can window filming be torn off completely? Maybe you can try the following tips.
1. Tissue alcohol
Drip some industrial alcohol or medical alcohol on ordinary tissue (industrial alcohol will have better effect), and then wipe it on the glass protector that cannot be cleaned, the remaining glass protector on the window will be easily rubbed off.
2. Tissue acetone
The method is similar to the alcohol of the paper towel above. Drop a small amount of acetone on the paper towel and then wipe the glass protector on the window. Glass protector of the residual gum can be dissolved quickly.
3. Tissue nail polish
At ordinary times, girls pour nail polish nail polish on paper towels or rags, and then wipe glass protector, which can also quickly wipe off the remaining stubborn gum on the window. As for the quality of nail polish, because it is used to clean windows, cheaper nail polish is enough.
4. Tissue solvent naphtha
For some windows with a long history, glass protector can also be removed with some solvent naphtha on paper towels.
5. Tissue banana water
Banana water is not to add edible bananas with water, but an industrial agent, which was originally used to remove paint. Since even the paint can be easily removed, it is also easy to go to the window glass protector. The practice is the same as that of the above. It is also to pour banana water on the paper towel and then clean the window.
6. Tissue hand cream
Hand Cream contains a large amount of grease, which is naturally effective in removing glue. Wipe the hand cream on the window with a tissue with a proper amount of glass protector. It is easy to remove the residual glass protector. Note that before using hand cream, you need to tear off the printed products on the surface of glass protector.
Nowadays, many people think that attaching window film to the window glass will make the space look more warm and comfortable. But sometimes, if the window is film long, it needs to be replaced, or if you don't want the window film, you need to tear it off. So how can the window film be torn off?
I. Sunshine and ammonia
This method can only be carried out on sunny days. If the place where you live is cloudy and the sun cannot heat the rear window, consider the following other methods.
1. Cut the two black garbage bags roughly into the shape of the car window. Spray soap water towards the outside of the window and put one of the black garbage bags on it. Smooth the plastic bag.
2. Lay water-repellent cloth on all surfaces near the car window to protect them, such as sound, taillights and padded surfaces. Wear a mask and spray ammonia water. The smell of ammonia water is harmful, and different people will have different reactions when exposed to the smell of ammonia water.
3. When the ammonia water is still wet, use another garbage bag or multi-layer plastic wrap to trap the ammonia water inside and close to window film. If the window is exposed to the hot sun, the garbage bag will absorb the hot air, which will help peel off the whole film.
4. Start peeling window film. Pick up a corner of the film with nails or Shaver pieces and peel it off as completely as possible. Be careful not to damage the defogging line. During the process of tearing the film, ammonia water should be sprayed to keep the film moist. If there is a film that cannot be peeled off, you can use Shaver pieces to scrape it off.
5. Remove the residual adhesive with ammonia water and ultra-fine steel wool, and wipe the glass window with tissue when ammonia water is not dry. Take out the garbage bag on the outside and clean the window thoroughly with glass cleaner.
Method
2. Steam ironing machine
This may be the simplest and fastest way to remove window film.
1. If you buy a steam ironing machine, you need to spend hundreds of yuan, but it can save a lot of time.
2. Fill water, turn on the power, hold the nozzle of the ironing machine and spray it against the window.
3. After spraying steam for a while, the adhesive will melt and the film will peel off like glass paper.
4. After removing the film, you can spray GoofOff or GooGone glue removal agent on the window and wipe it clean.
Method
3. Soap, newspaper and EasyOff detergent
1. Wipe the washing liquid containing soap onto the window with a sponge, and then spread the newspaper. Wait for 1 hour (when covering the newspaper, spray soap water every 20 minutes to let the water continue to permeate the newspaper).
2. Use the blade purchased by the hardware store to make a long stroke on the glass and scrape off the top film. If you cannot scratch off the top film, you only need to spray soap water again in about half an hour.
3. Rub the film with a blade. You don't need to push hard, the film will fall. When you spray soap water, there is no need to scratch, and the film will fall by itself.
IV. Hot gas
If the sun is not enough, the weather is not warm enough or you don't want to use the blade and ammonia water method, you can use the steam ironing machine (about several hundred yuan) to pre-process the film, and then peel it off. [1] You can also use a hair dryer or heat gun, but be cautious, because they produce more hot gas than steam ironing machines.
1. Heat a corner of the film with steam (make sure that the hanging ironing machine keeps a distance of 1.25 to 5cm from the film) until you can tear it off with your nails.
2. At the same time, use steam to heat and peel off the film by hand. Loosen the adhesive with steam before tearing off the film. Peel off the film slowly. If you pull too hard, you may tear the film, or worse, tear off the top film, leaving a sticky and hard-to-remove adhesive layer.
3. Wipe the residual adhesive clean with a towel. Press hard so that the adhesive can adhere to the towel without getting dirty. Heating the adhesive with steam helps to wipe it clean.
4. Clean the window thoroughly with glass cleaner.
V. Soaking and scraping
If you cannot use other methods or the area of the film is small, you can use this method (but it is time consuming).
1. Use Shaver pieces to cut a small mouth on the film, you can start from the cut film tear and pull.
2. Peel off the film. The film will not peel completely, and you may find that it will tear or separate into several pieces.
3. Spray soap water on the adhesive.
4. Use Shaver pieces to scrape off the adhesive. Scrape all the adhesive clean.
5. Clean the window thoroughly with glass cleaner.
