At present, the aluminum alloy door and window industry, especially the production of insulated aluminum alloy, is mainly manifested in details, generally starting from the Foundation, which is exactly the details and directly determines the quality of the finished doors and windows.
Let me introduce you to the common sense of aluminum alloy first.
Aluminum Alloy profiles, especially aluminum alloy door and window profile for construction, are generally 6000mm long branches. From the production and delivery of the material factory to the door and window processing unit, it is first necessary to unpack the package, and then use double-head saw, angle code... to unpack these profiles according to the drawing size, then use corner combining machine to assemble the profiles together to form the outline of doors and windows, then install, tape, hardware, and complete the workshop production of doors and windows, finally, the handle of installing glass and hardware to the project site completes the final installation, and puts weather-resistant sealant at the joint position of doors, windows and buildings to complete the whole process.
Work in the following aspects:
1. Unpacking, this is simple, but as engineering materials, the quantity is relatively large, so it takes some time to finish the work;
2. Blanking: as an apprentice, the work of using equipment blanking is guided by a skilled master, and you can learn it soon.
3. Deep processing of some small material, such as angle codes, muntin connectors, etc. This process is easy to learn, especially the equipment in the process. Study and study carefully. If you can process accurately and quickly, the boss will reuse you. However, equipment is often neglected by other workers.
Remarks of this article: with the progress of society, people's demand for housing is getting higher and higher, and doors and windows are not listed, so the quality of doors and windows will become higher and higher, and skilled use of these devices is your capital in the future.
4. Apply section sealant on the end face of the profile to be assembled, duct corner installation, set angle steel sheet, and then assemble it together. This can be done.
5. Angle: you can't do this job in a short period of time. You need to have some experience to do it perfectly. If you neglect the angle, the previous processes will be done in vain, moreover, the profile will be scrapped and the cost will be wasted. For the time being, read more, ask more, learn more, and see how skilled masters do it.
6. Installing adhesive tape is complicated and simple. Why do you say so? Simply speaking, it is because anyone can install it and can do it when he arrives at the workshop. Why is it complicated? How can I install the adhesive tape in place, fast, good and labor-saving. There are a lot of tips here. The old workers in the door and window factory now have a lot of experience and methods. You should learn and think carefully.
7. Install hardware. This job is mainly about several sizes. Ask the master in the work to know the method. Record the size and method of each hardware installation, and take it out when you forget it or can't remember it clearly. You can also teach your apprentice when you become an old master in the future.
8. On-site installation, including the installation of glass and the whole window, like the installation in the hole. On-site installation can broaden your horizon. Of course, sometimes you need to go high, and pay attention to safety.
9. Weather-resistant sealant: In a sense, it involves aesthetics, so new employees generally don't do this job. Learning for a period of time can be done, this work is quite hard.
10. After-sales maintenance, the detailed design of current system profiles is getting better and better. After-sales problems of doors and windows made and installed strictly according to the method of recommend are less and less, but this job is also the most difficult to do. After using doors and windows for a period of time, there are many possible problems, so you need to have sufficient experience, and you also need to have a nice-Nelly language. When dealing with these problems, don't take responsibility on yourself or blindly push it off, which will make customers feel disgusted and may cause unnecessary trouble.
