Aluminum clad wood doors and windows how to deal with deformation? Before processing, we need to find out what causes the deformation.
1. The air is too dry and deformed.
We can adjust it by enhancing the degree of wetness of indoor air, which usually occurs in winter, so we can install humidifier or cultivate potted plants indoors.
2. Cracking and deformation.
Use putty ash to smear and fill the seal, and then re-paint to add. However, in order to ensure that the door leaf appears as little as possible, including the appearance of its surface, consumers are advised to carry out a complete set of paint treatment.
3. Damp deformation.
Cross-band veneer after being damp, it expands, causing the surface facing material to deform or causing the overall deformation, so that we can remove the wooden door and lay it flat, and then remove the way of stacking in the opposite direction, in this way, the deformed part of the door leaf can be corrected, but it should be reminded that our door leaf is damp because the air is too humid or we cannot clean the water drops on the surface when cleaning, therefore, while we are doing a good job of moistureproof wooden doors, we also need to do a good job of maintenance.
