After the insulating glass is installed, the sealing work must be done well, so as to ensure a longer service life and the sealing performance reaches the best state. But there is also a shortage in Baimi. If there is air leakage in the central control glass, can you repair it yourself? The answer is OK.
1. If air leakage occurs in the hollow glass, you can prepare a screwdriver to take off the sealing strip of the hollow glass, then press and hold the glass wallpaper knife to slowly peel off, and put a layer of glass aside. If there is air leakage, there may be water vapor inside, or the problem of discoloration due to high temperature, wipe it clean with a clean cloth first, put it aside and wait for drying, or release the water through desiccant.
2. Place it for a few hours or speed up. You can also blow it with a hair dryer to help the moisture volatilize faster. Next, put structural adhesive on the cut part and reinstall and fix the removed glass. Then do the sealing work with structural adhesive in the middle of the two layers of glass, and the structural adhesive cannot be too much. If it is slightly solidified, the window can be installed, so that it can be sealed and there will be no air leakage again.
What should I do if there is air leakage on double glazing unit?
If double-layer glass leaks air, many properties will decline and bring many hazards. For example, water mist will form between double-layer glass and the transparency of double-layer glass will also deteriorate, and the surface of double-layer glass will appear dirty, which will affect the aesthetics of double-layer glass. In order to avoid affecting the normal use of users, it is recommended that you replace the leaking double-layer glass with a new one in time.
