Hanging rail doors often adopt the form of pushing and pulling, so they are also called hanging rail sliding door. Many friends are very interested in the installation and disassembly of hanging rail sliding door. Let's see how the installation and Disassembly Instructions of hanging rail sliding door are written.
The rail door, hanging door, is a door that uses the upper hanging wheel to support sliding. This kind of door has no noise, no threshold when opened, beautiful and generous. Rail doors are suitable for balconies, restaurants, kitchens, bathroom partitions, etc.
Hanging rail doors are often pushed and pulled, so they are also called hanging rail sliding door. Many friends are right the installation and disassembly of the hanging rail sliding door is very interesting. Let's see how the installation and Disassembly Instructions of the hanging rail sliding door are written.
Installation and disassembly of hanging rail sliding door
1. When installing the hanging rail sliding door, the first thing we need to do is to prepare the required materials: a top rail, a pulley, a hanging card, a rotatable screw shaft, a small amount of screws, and a door. And the main structure of the whole door frame has been completed and passed the acceptance, and the reserved opening and side decoration have also been roughly completed. The purpose of determining this is to avoid repeated construction in the future, which is time-consuming, laborious and expensive.
2. When installing the hanging rail sliding door, attention should be paid to the following: First of all, ensure that the width of the two doors must be consistent. Do not consider installing the hanging rail sliding door when the front and back space is relatively small.
The door with better quality needs to be selected before installation. In this way, the service time can be extended for a long time. Good quality is guaranteed. Another thing to pay attention to is that when installing, pay attention to noise control so as not to disturb other people around.
3. Then put the top rail into the pulley, cover plate, install hanging card, and make appropriate horizontal adjustment until it reaches the requirements. Finally, install the two doors, install the matching hardware accessories, observe whether the opening and closing are smooth, without any resistance or inclination, and then fix all bolts and screws.
The installation process of the entire hanging rail sliding door is completed. It should be noted that during the installation process, adjust and align the door seams on both sides, otherwise the whole hanging rail sliding door will not be coordinated.
(Source of text and text: Install a website today's headlines, invasion and deletion)
