Nowadays, many people choose invisible doors in order to decorate beautifully. In order to cooperate with invisible doors, the commonly used hardware accessories are invisible door hinge. In addition to the most basic function of connecting the door, invisible door hinge can also make the door switch more smoothly. So when you choose, you must choose according to the size of the invisible door at home. So what about the desktop after buying invisible door hinge? How to install it? Don't worry, let's introduce it to you.
Nowadays, many people choose invisible doors in order to decorate beautifully. In order to cooperate with invisible doors, the commonly used hardware accessories are invisible door hinge. In addition to the most basic function of connecting the door, invisible door hinge can also make the door switch more smoothly. So when you choose, you must choose according to the size of the invisible door at home. So what about the desktop after buying invisible door hinge? How to install it? Don't worry, let's introduce it to you.
(The image is from the Internet and deleted)
invisible door hinge usage
1. When installing wooden doors (slotting installation), first tighten the door and door frame, slot on the contact surface of the door and door frame (used to install two small leaf), and install them in the closed state, fix the two group leaf on the door and the door frame with screws respectively, then open the door to the 90-degree positioning state, and fix the two small leaf on the door and the door frame with screws respectively to complete.
2. When installing aluminum alloy and plastic steel door (or installing wooden doors without slotting), install the hinge on the door frame first, then open the hinge to an automatically fixed position (that is, the position when the door is opened to 90 degrees), put the door leaf into the door frame (closed state), and then close the hinge, the hinge can be fixed on the door leaf.
3. The positioning function is fixed steel ball, and the fixing force is determined by the jackscrew at both ends of the pipe, and can be adjusted appropriately by screwdriver.
Installation procedure of invisible door hinge
step 1: align the raised alignment line on the back of the hinge with the door leaf and door frame and draw profiler.
Step 2: Pay attention to the slight change of grooving depth when grooving, and design the slope shape of inside depth and outside shallow (close to the axis) when grooving according to the slope shape of blade thickness, after installation, the hinge blade cannot project out of the door leaf plane or door frame plane, but do not slot too deep. The hinge and door surface should be kept on the same horizontal plane as far as possible.
Step 3: first fix the upper hinge on the door leaf and then fix the lower hinge on the door frame. When installing, let the hinge open at a position above 90 degrees (the Hinge will automatically close when it is less than 80-90 degrees) after the hinge is installed, open and close the door leaf several times to see if it moves smoothly.
Step 4: turn on the hinge function and use the cross screwdriver to remove the starting screw. The invisible door hinge starts to work. If the speed and strength of the debugging hinge are not suitable, it can be adjusted by speed control screws.
(The image is from the Internet and deleted)
hinge is an important part of invisible door, and the operation of the whole door is a small part. Have you learned the usage and installation steps of the invisible door hinge above?
(The article comes from the Internet and is invaded and deleted)
