The problem of air leakage in plastic steel windows can also be pasted with kraft paper. If old windows are used in the home, some sawdust can be filled in the interval between the Windows and Windows, which can solve the moisture, in this way, the cold air outside cannot enter the room.
The weather is very cold in winter. If the window leaks air, the indoor temperature will become lower, and people will become very uncomfortable. They want to make the indoor temperature higher, then we need to solve the problem of air leakage in the windows in time, so as to make the living environment more comfortable. Here is an introduction to the wonderful ways to solve the air leakage of plastic steel windows.
I. Fill the gap
if the air leakage of plastic steel window is caused by the gap between the window, then you need to clean the dust and dirt in the gap between the wall and the window frame, and then fill it with some Styrofoam, then you can use some cement and sand to fill the gap, and then modify it. If there is air leakage between the window frame and Casement, then you can use some sealing strips to repair it, if the gap between them is very large, then it is necessary to add a layer of plastic steel window to the original window, so as to solve the problem of air leakage.
II. Plastic steel window and plastic
window leakage will be very uncomfortable in winter. Plastic steel windows are prone to ventilation after being used for a long time. If the gap at the interface is relatively large, there is no way to close them, you can paste it with sponge around the window, and then use the window plastic cover, so that there will be no air leakage problem, and the thermal effect is also very good.
3. Kraft paper paste method
what are the best ways to solve the leakage of plastic steel windows? The problem of air leakage in plastic steel windows can also be pasted with kraft paper. If old windows are used in the home, some sawdust can be filled in the interval between the Windows and Windows, which can solve the moisture, in this way, the cold air outside cannot enter the room. If the gap of plastic-steel window is relatively large, it can also be closed by some kraft paper and paste, which can play a very good repairing role and will not cause air leakage again, and the effect is also very obvious.
IV. Find the cause and fix it
we should find out the real reason for the air leakage of plastic steel windows to see if the windows are not installed properly or there is a problem with the windows themselves. If there is a problem with the windows, then we need to find a seller or manufacturer, if it is an installation problem, you can remove the window yourself and reinstall it. You can also clean the gap between the door set and the window frame, and then use some Styrofoam fill plug to enter it, then fill it with some cement and sand, and then do a good job of repairing, so the air leakage situation can also be solved.
What I introduced above is a wonderful way to solve the leakage of plastic-steel windows. After reading the above introduction, you should also have a certain understanding. If the leakage of plastic-steel windows occurs, you can try the above methods, the first is to find out the real reason for the leakage of plastic steel windows, so that we can use the correct way to solve it. The general solution is still very simple.
