Steel window is loved by consumers because of its beautiful appearance, durability and other characteristics. Most modern families adopt steel window. But in our life, we often encounter the trouble of replacing removable washable of the damaged windows. Then the problem arises. How to disassemble the steel window?
Steel window is loved by consumers because of its beautiful appearance, durability and other characteristics. Most modern families adopt steel window. But in our life, we often encounter the trouble of replacing removable washable of the damaged windows. Then the problem arises. How to disassemble the steel window? Next, let's briefly introduce it for your reference!
1. How to disassemble plastic steel glass
first of all, stack the two windows together to overlap, hold the Casement outside with both hands, lift it up, push it out, and move the lower part of the Casement out of the window track, at this time, hold Casement hands down a little harder, and the upper part of Casement will come out of the window frame. After the outer Casement is taken down, the inner Casement is more convenient to disassemble, and can be removed according to this method.
Secondly, attention should be paid to the disassembly process. Pay attention to safety when disassembling casement. In order to prevent depravity, it is best to cooperate with two people. Moreover, some casement may not be lifted during the disassembly process, maybe because the plastic strip (anti-theft plate) on the side is limited, you should carefully observe the groove on the side of the Casement to see if the plastic strip limits doors and windows. If it gets stuck, gently pry it off with a screwdriver, after the new Casement is installed, install the anti-theft board.
The other is to observe whether there is a prominent object in the groove on the window frame. This object has the limiting effect, and be careful not to damage it during disassembly.
2. How to change glass for steel window
1. Remove the broken glass first. Use a putty knife to remove the layering first, then take off the double-layer glass, clean up the debris, and be careful not to damage the middle sealing strip.
2. Replace new glass. After measuring the size and thickness, prepare a suitable piece of glass and clean up the inner surface of the new glass and the original glass, so as not to be wiped out after installation. Clean up the contact surface of the sealing strip and place the new glass in, sealed with special silicon sealant.
3. Put back the glass. After the silicon sealant is dry, put the double-layer glass back, install the layering, and replace the plastic steel glass.
The above is the introduction of how to disassemble plastic steel glass and how to replace steel window glass. After the above introduction, you should know something about it. In fact, it is not difficult. In the case of energy, everyone can get started in person!
