Burglar mesh installation method 1. Measurement size 1. Horizontal skeleton measure the size of the window because the horizontal skeleton needs to be installed on the outer wall outside the window, and the size should be larger than the size of the window account 2. If it is a vertical skeleton, it needs to be installed on the windowsill outside the window, just like the size of the windowsill.
Burglar mesh installation method
1. Measurement size
1. Horizontal skeleton measure the size of the window because the horizontal skeleton needs to be installed on the outer wall outside the window, and the size should be larger than the ruler of the window account 2. If it is a vertical skeleton, it needs to be installed on the windowsill outside the window, just like the size of the windowsill.
II. Skeleton cutting
because the skeleton is two frames up and down, so when the skeleton is cut, the two frames are facing and the holes are aligned, otherwise the steel wire will not be vertical when the steel wire is tightened.
3. Fixed skeleton in the wall
first, punch holes in the skeleton slot. There is a self-made line in the slot, and make a hole every 10cm apart on the line. Then make holes in the frame slot, and punch holes in the wall. The upper and lower frames should be aligned.
IV. Steel wire
hang the steel wire to take one end of the steel wire, insert the steel wire into the direction of the single load binder arrow, and pull it out for 1 m to 2 m, which is used to connect to the room and connect the detector. The function of one-way load binder is to fix the first and tail steel wires. A single locking steel wire can only be pulled tightly and cannot be pulled back. The first steel wire is in the upper right corner, and the last steel wire may be in the upper left, it may also be at the bottom left.
V. Skeleton self-locking
lock the skeleton cover on the skeleton slot by the skeleton self-locking. And it cannot be opened. Only when the steel wire is cut and the tension of the skeleton groove is restored to the factory state can the skeleton cover be opened. The implementation and application of this device, for the owner, the installed protective net looks more beautiful (no rivets), and the anti-theft coefficient is safer (the anti-damage performance of the skeleton is greatly improved). But for the constructor, that is significant.
Security window precautions before installation
security window is an indispensable part of the home in modern society. Most people don't like to do it, but they can't escape the fact that it must be installed. First, it can prevent theft. Second, children are Naughty by Nature, it can effectively prevent children from crawling everywhere. As the saying goes, Heart is home!
After some families are installed, there will be some minor problems that were not considered before installation. The following suggestions are for your reference.
1. First of all, what materials should be selected? Generally, there are (iron pipe, stainless steel, color steel) and so on in the market. Iron pipe is used less ugly, and stainless steel is easy to rust now, colored steel not only looks good in color but also won't rust.
2. Consider whether each property requires security window to prevent modification.
3. Small doors should be left for air conditioning installation and day-to-day maintenance for maintenance.
4. I don't like fixing windows, so I can make mobile pull-up windows so that my vision is wider.
5. Install security window before the paint is finished, in case the installation damages the wall surface.
Household security window installation matters
household security window is an effective barrier to protect the personal and property safety of the owner's home. Although security window cannot be a copper wall, making some improvements to improve the performance of household security window can block ordinary theft, the following are the precautions for installing household security window.
1. Choose a relatively formal company with good credit (with a business license, you can find it in the Industrial and Commercial Bureau) to cooperate, which is more secure. In case something happens, there is also a saying.
2. The most important factor in selecting materials and purchasing security window is stainless steel pipe material. The national standard for stainless steel pipes requires that stainless steel pipes must contain a certain amount of nickel and chromium (SUS304), this ensures that the stainless steel does not rust. Also, the thicker the pipe, the firmer it is. The thickness difference is 0.1mm and the pressure resistance difference is hundreds of kilograms. Generally speaking, the strength of security window of the thickness of the national standard from 0.6mm to 0.8mm is enough. If iron bars are usually added on the first floor, it can prevent them from being opened.
3. In the process of door-to-door measurement, the master should make it clear that a small door should be opened where the air conditioner needs to be installed, which is convenient for installation and maintenance. Generally, one can be opened, not too much, otherwise, it will be unreliable. At the same time, security window should not be too big and not firm. If you don't like fixing windows, you can make indoor push-pull security window, which will broaden your vision, but remember to close it at any time.
4. The installation time of security window is better to install it before the last topcoat in your home is finished. Don't clean it after security window of this fashion. The paint will be damaged or repaired during the installation process. After completion, you should check whether all the screws are installed to prevent workers from stealing work.
5. If you have children at home, consider semi-active household security window. This installation method has a slightly lower anti-theft level, mainly to protect children from falling down from the downstairs.
Alloy security window installation method
i. Built-in installation
built-in installation means that zinc alloy security window is installed on the inside of the window, which not only ensures the anti-theft safety of individual building, but also maintains the overall appearance of the whole building.
In order to pursue the unity of appearance as a whole, some residential communities avoid different owners installing different types of security window, or some owners install security window, while some owners do not install, as a result, the appearance of the residential area is not uniform, and the owners are required to adopt built-in installation uniformly, which is both anti-theft and beautiful.
II. External installation
external installation refers to the installation of zinc alloy security window outside the window, which is also a common installation method of zinc alloy security window in practice. Most owners adopt external installation.
Features of external installation:
1. It does not affect the normal use of the inner window.
2. The first security barrier is formed externally, and the security is better.
3. Convenient installation and maintenance.
4. Compared with individual building, the appearance is more beautiful.
III. Convex-type installation
zinc Alloy security window, commonly known as "oriel window", is the installation method of increasing the original window area by installing security window, which is suitable for buildings with flat surface and large area of window exterior wall. For convex-type installation, canopy should be added on the top and a bracket should be installed on the bottom. For the convenience of home users, clothes hangers can also be installed on the top.
Features of convex-type installation:
1. Increase the use area of the building. You can install clothes hangers to dry clothes at bulge, or grow flowers and place sundries in the raised place.
2. The manufacturing method is more complicated. Compared with the installation of the other two methods, the manufacturing method of zinc alloy security window with convex type installation is more complicated and labor-intensive.
