Sliding door in terms of function, it is convenient for indoor partition and neatness, which can also save room space and has good decoration effect. However, it must be based on the structure of the House, space size and use functions to design. At the same time, we should also pay attention to some basic matters during daily use.
Sliding door in terms of function, it is convenient for indoor partition and neatness, which can also save room space and has good decoration effect. However, it must be based on the structure of the House, space size and use functions to design. At the same time, we should also pay attention to some basic matters during daily use. So how to install sliding door? As an owner, you must know about it. Please take a closer look at the nine steps of how to install sliding door.
Step 1: The hanging sliding door is difficult to handle due to the installation of track box first and then brick sticking, and the joint between exposed track box and brick is not easy to handle. Because the track bears a certain pressure, the brick is also stressed. After a long time, the brick beside the track will easily crack. In addition, if you are in the kitchen, bathroom and other spaces, track box places are easy to hide dirt, fume and dust, etc., which brings trouble to cleaning.
Step 2: sliding door the size of the upper part of track box should be 12cm high and 9cm wide. Like curtain box, install the track within track box, which can hang sliding door on the track. Nowadays, the height of most doors or door openings is 1.95 to 2.15. Experience shows that when the height of the door is less than 1.95 meters, no matter what the height of the person is, it will feel very depressed and uncomfortable. Therefore, when doing sliding door, the height should be at least 195 12=207cm, and there is enough space to do track box before we can consider doing sliding door. Otherwise, it can only be hung externally, that is, track box is exposed outside, which is definitely not beautiful, and after a long time, the gap between the door and the wall will become larger.
Step 3: The width of sliding door is exquisite. The gold size of the normal door is about 80cm × 200cm. Under this structure, the door is relatively stable. If there is a height higher than 200cm, or even higher, do sliding door, it is better to narrow the width of the door or make more sliding door under the premise that the area remains unchanged, keep the door stable and safe to use.
Step 4: Use sliding door (open rail track box) from floor to top with caution. Because the swing scope is too large when pushing and pulling, it is easy to deform for a long time sliding door, and the deformed back door cannot be opened, which means that it cannot be repaired or used.
Step 5: Since the sliding door is in contact with both sides of the wall or cabinet, no other objects are allowed to block the closing of the sliding door at the contact position. For example, the position of the drawer in the cabinet should avoid the intersection of sliding door and be at least 1cm higher than the bottom plate; The drawer in the folding door cabinet should be at least 15cm away from the side wall. Pay special attention to the power switch and socket on the wall here, if sliding door is blocked, the position of the switch and socket should be changed.
Step 6: no matter you make the ground of any material, you must ensure the level, and the four walls of the door opening should also be kept horizontal and vertical. Otherwise, the door will be skewed after installation. The adjustable error is no more than 10mm.
Step 7: Do not install the kick plate in the installation position. Plaster line can be installed on the sealing plate above the closet. If the door is directly to the top, do not install the plaster line.
Step 8: cut the carpet below 5mm thickness and paste it directly to lower track. If a carpet with a thickness of more than 5mm is installed with double tracks, it can be directly fixed on the carpet with screws: if a monorail is installed, the carpet at the location must be cut off, place 3-5mm thick wooden strips on the carpet in advance so that the monorail can be directly pasted on it.
Step 9: The combination of wood floor and tile, which mostly occurs between balcony and living room, bedroom and living room, the solution is as follows:
1. Try to install lower track on a material.
2. Add another wood board or marble with the same width as lower track between the two materials. Door stone can also be used in the kitchen.
Tips: Dear friends, have you seen the above sliding door installation steps, do you know some? If you want to learn, you can follow the steps in this article to install a try. I believe you will feel that the installation of sliding door is so easy!
[Extended reading]]
how to choose sliding door? Six details help you easily!
Are you sure you really know sliding door?
These six key steps must be kept in mind when judging the quality of sliding door.
