Solid wood door is a medium and high grade wooden door, and its excellent quality makes consumers favor it. Then for the common deformation of wooden doors, solid wood door can not be exempted from customs. How to prevent the deformation of solid wood door, the editor thinks that starting from the installation of wooden doors, you can get twice the result with half the effort!
Solid wood door is a medium and high grade wooden door, and its excellent quality makes consumers favor it. Then for the common deformation of wooden doors, solid wood door can not be exempted from customs. How to prevent the deformation of solid wood door, the editor thinks that starting from the installation of wooden doors, you can get twice the result with half the effort!
Solid wood door installation method:
step 1:
1. Lay the gasket and place the tools used on the gasket in turn.
2. Open the product package and take out the product and put it on the gasket in turn.
3. Check whether the product is damaged and make a record.
4. Start installation.
Step 2:
1. Assemble the door frame with self-tapping screws.
Step 3:
1. Place the door frame in the corresponding door hole.
2. Fix the door frame in the door hole with wooden wedge and wooden support.
3. Wooden Wedge. When using the wooden support, pay attention to the difficulty point.
Step 4:
1. Shake Styrofoam well before using Styrofoam, and shake it about 30 times.
2. Inject Styrofoam into the gap between the door frame and the door hole, three points on the left and three points on the top.
3. Glue injection should be uniform, and the glue injection area is about: door frame thickness *(150mm-200mm).
Step 5:
1. After the gun glue is completely cured, remove the wooden wedge and wooden support.
2. Install the door lock and hinge on the door leaf.
3. Install the lock plate on the door frame.
4. Install the door leaf on the door frame.
5. Debug the opening of the door leaf and check whether it is flexible.
Step 6:
1. Install the door line.
2. When installing the door line, add a proper amount of white glue to the door frame slot.
3. To install the door line, first install the side line on both sides, and then install the upper line.
4. If the tenons and slots are too tight during installation, the tenons of the door line can be processed by hand Planer. Remember not to smash it hard, especially when it comes to the line.
5. After the installation is completed, the whole door should be thoroughly inspected and debugged to ensure the installation quality of the product.
6. Finally, close the door line and the junction of the wall and the ground with silica gel matched with the wall. Users can also close the door by themselves with mortar, depending on the situation. The bathroom must be closed with silica gel at the junction of the door line, wall and ground.
