Sealant strip: used on sliding window, sliding door, adhesive strip used on casement window, vertical hinged door, hanging window, etc., which can prevent leakage or intrusion of internal and external media (rain, air, dust, etc.), it can prevent or reduce the damage caused by mechanical vibration and impact, thus achieving the functions of sealing, sound insulation, heat insulation, shock absorption and other elastic banded or rod-shaped materials. Wool Tops is generally used with sliding door or window door leaf or Casement, which acts as buffer, shock absorption, sealing and heat preservation.
Usage:
1. First understand the specifications of wool tops. Before the specific operation, you must first know what specifications are available in wool tops. Although the sliding door and window molds are basically similar, some door and window series are different, and the profile specifications will also be different. Therefore, before doing this, you must first understand which type of wool tops is used. There are many specifications of wool tops, including 5*6,5*7,5*8 ,5*9,6*8,9*9, etc.
2. Make sure wool tops is used on sliding door or sliding window. It is better to use wool tops silicide clip wool top for the wool tops on the door, and the Middle clip is double-layer plastic, which has better sealing performance. The Wool Tops used on the window can be ordinary wool tops or high-density wool tops.
3. Wool tops is installed around the door and window fan or on the windshield and the position of sliding up and down. There are notches that wear wool tops in the corresponding position of the profile. First measure the length of wool tops used, and put wool tops into it along one end of the notch. Note that one side of wool tops is close to the outer mouth.
4. The position where the broken bridge aluminum sliding window fan is combined with the side seal, that is, the window frame, is to wear double wool tops. Because Broken Bridge aluminum is made up of heat insulation strips inside and outside, it is double wool tops when wearing wool tops. Select wool tops, which must be consistent with the size of the slot. If it is too large, it will fall off easily.
5. When wearing wool tops, the length of wool tops should be moderate, not too long. If it is too long, it will not be smooth to push and pull. When wearing wool tops, make the wool tops flat, the outside fluff feels dense, and the color is best matched with the color of the profile.
6. The installation method of wool tops is simple. As a door and window enterprise, there are special personnel in charge of wearing wool tops, so as to carry out the next production. The main function of wool tops is to isolate indoor and outdoor air and keep warm. At the same time, it can protect the edge of doors and windows from impact damage and prolong the service life of doors and windows.
7. As long as you find the right notch and the appropriate wool tops, it is very convenient to install.
