Doors and windows are essential items in every family. Now the doors and windows change and upgrade, unlike the old doors and windows long ago, a bolt can be done. Nowadays, door and window anti-theft is better. Door handles are usually used to control door and window locks. If door and window handle is damaged, how can they be disassembled? How to disassemble car window shade at the same time? Let's take a look!
Doors and windows are essential items in every family. Now the doors and windows change and upgrade, unlike the old doors and windows long ago, a bolt can be done. Nowadays, door and window anti-theft is better. Door handles are usually used to control door and window locks. If door and window handle is damaged, how can they be disassembled? How to disassemble car window shade at the same time? Let's take a look!
(The image is from the Internet and deleted)
1. How to disassemble door and window handle?
1. Find a way to spray lubricant into the hole in the middle of the actuator, then use Vice to clamp the shaft, shake it up and down, as long as there is a little gap, and then there are pliers to clamp the root of the fan, clamp it out.
2. If it doesn't work, knock the shaft directly into the fan as much as possible. After it is in place, press the white hand back. You can see it at this time, there was a small square hole on the handle. If there is a fine seam after pressing it in place, you can use a piece of wood pad to knock outside the handle, which can also be removed.
2. How to disassemble car window shade?
1. First take off the sealing strip fixed and sealed car window shade, and pay attention to it during operation. If the force is too large, the original complete plastic steel car window shade will be damaged. If the sealing strip is fixed tightly, it is also recommended to use a screwdriver to pry carefully from the bottom of the seal.
(The image is from the Internet and deleted)
2. After removing the sealing strip, lift the whole car window shade up until the top of the slide rail, and then remove the whole Casement.
3. After removing car window shade in this way, the glass corresponding to car window shade can be removed. It is recommended to use a straight-shaped screwdriver with moderate width to slowly pry open the gap in the glass. The force should not be too large, when the glass is slightly pried open, it is recommended to use oblique force to remove the glass.
The above is the explanation about the disassembly methods of door and window handle and car window shade. Generally, technical work focuses on methods rather than brute force. If you can't handle it yourself, you 'd better find a professional master to help! If you think it is useful, you can pay more attention to the sharing of more home improvement knowledge of Zhonghua door and window network!
(The article comes from the Internet and is invaded and deleted)
