Door and window handle, as the name implies, is the handle installed on doors and windows, which can facilitate us to open and close doors and windows, so how to install door and window handle? After reading the following introduction, you will know.
Door and window handle, as the name implies, is the handle installed on doors and windows, which can facilitate us to open and close doors and windows, so how to install door and window handle? After reading the following introduction, you will know.
(Image Source Network, invasion and deletion)
door handle installation steps
1. Open the door so that you can operate both internal and external door handle at the same time. Find the two screws on the cover plate of the inner door handle, which are fixed together with the inner and outer door handle.
2. Use a cross head screwdriver screwdriver to counterclockwise the two screws, and pull the inner door handle away from the door and pull the outer door handle away from the door.
3. Fix the outer edge of the latch door and use a cross head screwdriver screwdriver to remove the two screws. Out of the door, pull out the latch plate assembly.
4. Use a cross screwdriver to counterclockwise the door frame of the two fixed strike plates and pull door jamb off.
5. Pass the new latch locking plate assembly through the door on the edge of the hole. Part of the curve of the latch bolt should point to the outside of the door. Door Latch fixing plate door handle kit comes with wood screw.
6. The door that enters the door inserts door exterior handle from the outside. Usually two sleeves, the cylinder of the door latch hole inside will fit. Press door handle until the cover plate is close to the door.
7. Insert inner door handle into the door from the inside of the door. Two fixing screws, turn the hole on the cover plate clockwise screw thread to door exterior handle sets, tighten the screws, and use a cross screwdriver.
8. Fix the impact plate and the screws attached to the kit on the curved door frame around the inside of the door frame.
(Image Source Network, invasion and deletion)
the above is the relevant knowledge of door handle installation steps. Although it is only the installation of small door handles, it also requires certain skills, and there are many things to pay attention, it is not as simple as we thought, and it is not very difficult to install according to the steps described above.
(Article source network, invasion and deletion)
