You must have heard of sliding door, but what is hanging door? Probably many people don't know, maybe they haven't seen it. Today, let's introduce what is hanging door? How to remove hanging door?
You must have heard of sliding door, but what is hanging door? Probably many people don't know, maybe they haven't seen it. Today, let's introduce what is hanging door? How to remove hanging door?
What is hanging door?
The rail door, hanging door, is a door that uses the upper hanging wheel to support sliding. The characteristic of the rail door is that there is no lower track, which is not suitable for installing lower track of the space, such as stone ground. Rail doors are divided into the following two types:
light rail door: it is light to push and pull, and has various styles. It can be designed according to ordinary sliding door styles. The door frame and door panel materials are completely consistent with ordinary partition or closet doors.
Heavy-duty rail door: the door frame is wide and thick, the door panel is thick, strong and durable, door body the overall effect is similar to solid wood door, but the service life and grade are better than ordinary wooden doors, push and pull smoothly, and can be installed buckle door lock. Sliding door the width of the two doors must be guaranteed. If the front and rear space is small, sliding door can be considered. Pay attention to the noise generated when installing sliding door, and choose a better hanging rail.
(The image is from the Internet and deleted)
how to remove hanging door? Hanging door disassembly tutorial
first of all, the disassembly of the rail door is step-by-step. The rail door has two installation methods: open installation and concealed installation. If you look carefully, you can find that there is a hanging wheel insert on each side of the door, as long as you scrape off the decorative skin on the side, you can obviously feel the position of the inserts, which is the key to removing the hanging rail door. Both sides of the open-mounted rail door can be disassembled. If it is concealed, one side can only be removed first, and the inserts and the side of the door are flat, lift the door and pull the door out while turning the door out. If the rail door gets stuck, it will be difficult to disassemble. Be patient, but be careful, do not scratch the edges and corners, and do not damage other parts.
The next step is to disassemble the hanging rail of the hanging rail door, inspect the parts of the hanging rail door one by one, then install the steel cap used to fix the hanging rail at the top plate of wooden frame, and then disassemble the hanging rail on the board, then put pulleys and cover plates into the top rail, and finally install hanging card to make appropriate horizontal adjustments until the levelness of the rail door reaches the requirements. Generally, the track box size of the installation upper part of the rail door should be kept between 12cm and 9cm. Only the rail door with the size conforming to the specification can be guaranteed not to fall off after installation, attention should be paid when disassembling the rail door. The width of the two doors must be the same. Before disassembling, the door with better quality needs to be selected, in this way, the usage time can be extended for a long time.
The diagram of the hanging door disassembly tutorial is the above part. I hope it will be helpful to you. If you want to know more, please continue to pay attention to this site.
(The article comes from the Internet and is invaded and deleted)
