Wooden doors are the decoration materials that many families like in ancient and modern times, but the durability of wooden doors is not strong. It is also a problem in ancient times that they need maintenance and renovation for a long time. With the development of economy, there are many ways to renovate wooden doors, among which sticking wood grain paper has become the choice of many families. Is wooden door refurbishing sticker wood grain paper OK? How to stick wood grain paper? I want to know. Look down!
Wooden doors are the decoration materials that many families like in ancient and modern times, but the durability of wooden doors is not strong. It is also a problem in ancient times that they need maintenance and renovation for a long time. With the development of economy, there are many ways to renovate wooden doors, among which sticking wood grain paper has become the choice of many families. Is wooden door refurbishing sticker wood grain paper OK? How to stick wood grain paper? I want to know. Look down!
(The image originated from the internet and was invaded and deleted)
is wooden door refurbishing sticker wood grain paper OK?
Wood grain paper is also called Poly paper, which is a kind of special paper. Generally, raw wood pulp Kraft paper is used as base paper, and then embossing and dyeing are carried out on the surface. Finally, wood grain paper with colorful and different patterns is produced.
Wood grain paper pattern is printed by imitating tree grain, with a thickness of 0.5~1.0mm and a smooth and glossy surface. Wood grain paper belongs to the decorative paper classification in Polaroid paper and belongs to a decorative paper with the weakest wear resistance. It is mainly used for exterior decoration or trimming of furniture, speaker and other household and office supplies. Wooden door refurbishing sticker wood grain paper is OK.
(The image originated from the internet and was invaded and deleted)
how to paste wood grain paper? Specific operation of sticking wood grain paper:
1. The old wood grain paper needs to be torn off. After tearing off the old wood grain paper, wash the old woodware furniture to remove stains and use it after drying.
Note: No. 0 sand-papering, uneven puttying, can also be polished again.
2. Use 20-inch oil brush banana white primer to paint, and brush 1-2 channels on the surface of the furniture to make the wood surface White. Dry thoroughly after 8-10 hours, polish it with No. 0 Wood sandpaper, ex-all fine particles and uneven parts, and brush it again.
3. Mix the above materials evenly with 50% thick white paint, 35% gasoline or solvent naphtha, 10% grease varnish or boiled wood oil, urge dry punishment 5%, filter with 180 mesh sieve, and spare. Take the above original white paint mixture and brush it for the second time. After drying, it can be pasted.
4. Cut the wood grain paper into many pieces according to the size requirements of woodware, use 2 inches oil brush, banana white latex liquid (dilute the raw glue with water 1:1), brush on the oil-painted wood surface, then stick the wood grain paper and wipe the wood grain paper with a towel to make the wood grain paper stick firmly with the wood surface.
Note: do not make wrinkles or bubbles appear. When each piece of wood grain paper is connected, the wood grain should also be consistent. Do not leave a seam on the interface. When gluing, apply a piece of paste-block to prevent the glue from drying.
5. After all the wood grain paper is pasted on the bottom, air dry, wipe it with a fine cloth, and then brush Novolac. It is required to brush three times, and the painting method is the same as that mentioned above.
OK, so much is introduced about whether wooden door renovation can be pasted with wood grain paper and wooden door paper. If you want to know more about wooden door, please continue to pay attention to China wooden door network.
