The installation of anti-theft door locks must be paid attention to. Consumers must be careful when purchasing door locks. There are many types of anti-theft door locks, and the requirements for door locks are different in different occasions. As far as families are concerned, the most used is anti-theft door lock, which has high security and moderate price. Attention should also be paid to the installation of anti-theft door lock.
The installation of anti-theft door locks must be paid attention to. Consumers must be careful when purchasing door locks. There are many types of anti-theft door locks, and the requirements for door locks are different in different occasions. As far as families are concerned, the most used is anti-theft door lock, which has high security and moderate price. Attention should also be paid to the installation of anti-theft door lock. Now let's look at the installation methods and techniques of anti-theft door locks.
Installation method of anti-theft door lock
1. Press the installation size diagram of the lock body, and drill the installation hole position of the lock body.
2. Put the lock body into the hole position in turn, find the front and rear fixing screws, install the screw and connecting screw on the outer panel parts, insert the linkage square bar into the square bar hole of the lock body, outer panel parts handle square holes align with connecting square bar holes and install outer panel parts.
3. Install the inner panel parts, fasten the screws to the front and back; Insert the lock head body into the lock body keyhole from the inside to the outside; Insert the screws into the lock body panel hole and align the lock head body mounting hole thread before fastening. Install latching box or lock plate on the door frame.
4. After the initial installation, turn the outer handle and the inner handle to observe whether the latch bolt can be smoothly withdrawn and extended; Turn the rear panel knob to feel whether the dead bolt is smoothly withdrawn; insert the key to rotate back and forth and feel whether dead bolt is smoothly extended and withdrawn.
5. After fastening each assembly screw, repeat the above action and test several times. If each action is not smooth, loosen the screw and try again after adjusting the position until it is appropriate.
Precautions for installation of anti-theft door lock
according to the principle of lock cylinder, anti-theft door locks can be divided into cylinder lock, steering lock, magnetic locks, IC card lock, fingerprint lock, etc.
Cylinder lock is common with magnetic locks. Like one-shaped lock, Cross lock, computer lock and so on all belong to cylinder lock; Magnetic lock was popular several years ago, but it was rare these two years.
If the key rod is bare without teeth and is inlaid with three or four small dots, such a lock is a magnetic lock. Insiders believe that the magnetic lock is not reliable and the cross lock is very convenient to open. Now special tools for opening magnetic locks and cross locks can be bought on the market. With this tool, thieves can open most magnetic locks and cross locks in a minute or two.
The installation of anti-theft door locks seems to be a simple project. In fact, many people still don't know much about the details of the installation of anti-theft door locks. Generally speaking, when consumers buy doors, manufacturers will have the installation diagram of anti-theft door locks. Users only need to install the above steps to operate.
