Window Film inside Or outside? Window Filming What Are the Precautions?

Windows are everywhere, and many people know that the glass of cars has a layer of film, and the glass of buildings can also be pasted. Why film? The film can act as a barrier to sunlight for the glass, then the problem comes. Is the window film inside or outside? Window filming what are the precautions?

Windows are everywhere, and many people know that the glass of cars has a layer of film, and the glass of buildings can also be pasted. Why film? The film can act as a barrier to sunlight for the glass, then the problem comes. Is the window film inside or outside? Window filming what are the precautions?

(Image Source: Network, invasion and deletion)

window Film inside or outside?

1. Window film inside

if the window film is attached to the window, it is mainly to prolong the service life of the window film, and at the same time to make the window film play a certain role of heat insulation and light insulation. Then the occupants will live in it, which will be more comfortable. Therefore, most families will choose to stick the window film in the window when sticking the window film.

2. Window film outside

some families will stick the window film to the outside, mainly because the sunlight and heat are exposed from the outside, and they want to make the room cooler, only by sticking the window film to the outside can more sunlight be isolated. Therefore, many people will stick the window film on the outside. However, it should be noted that the window film attached to the outer layer of the window is usually exposed to the wind and the sun, and it needs to be sun-proof and waterproof. That is to say, heat-insulating film attached to the outside of the window need to use special film.

3. Window film is attached inside and outside

if you want to stick the window film, the room looks more comfortable, and at the same time, you also want the window film to play the greatest role. Then heat-insulating film can be attached to both the outer and inner layers of the window at this time. This can not only ensure that the function of the window film is maximized, but also ensure that the window film has heat insulation effect.

(Image Source: Network, invasion and deletion)

window filming what are the precautions?

1. The first thing to do is to cut the window glass film by glass protector. The glass protector bought are usually one roll by Roll. The width is determined when purchasing. What needs to be done is to cut the length. When measuring the window size, it must start from the same side of the window. Glass protector is generally divided into two layers, one layer is a colorless transparent protective film, and the other layer is a colored film. Be careful not to separate the two layers. Only a little can be torn first, which can be torn from a corner, and then the corner stickers onto the glass and then slowly tear reversed adhesive paper a little.

2. Pay attention when cutting the film. Do not cut the glass into the same size as the window. The glass protector to be pasted should be slightly larger than the glass, which can be pasted more tightly. Before the film, spray some water on the glass. Don't be afraid of getting wet. The more, the better. Then spread the glass protective film in the wide direction, align one end of the window, stick it slowly, and then stick it down slowly, after sticking, use a scraper or card to clean the water in the direction of 4 points, so that the film will not have bubbles.

The above is the introduction of Windows film inside or outside. If you want to know more, please continue to pay attention to this site.

(Article Source: Network, invasion and deletion)