Frameless glass door is one type of glass door. The biggest difference between it and others such as aluminum glass door is that there is no border around the door leaf of frameless glass door. The installation method of frameless glass doors is similar to that of ordinary glass doors, but there are also some differences. The installation method and key points of frameless glass doors need to be carefully read when they are being decorated, maybe you will use it.
Frameless glass door is one type of glass door. The biggest difference between it and others such as aluminum glass door is that there is no border around the door leaf of frameless glass door. The installation method of frameless glass doors is similar to that of ordinary glass doors, but there are also some differences. The installation method and key points of frameless glass doors need to be carefully read when they are being decorated, maybe you will use it.
Installation method of frameless glass door
1. Pay-off positioning: At the beginning of the installation of frameless glass door, the fixed glass partition and movable glass door leaf must be uniformly placed and positioned. To determine the position of the door frame, accurately measure the ground elevation and the top elevation of the door frame.
2. Install the limit groove at the top of frameless glass door frame: two metal decorative board edges are drawn from the center line of the bullet, and then install the limit groove at the top of the door frame according to the edges.
3. Installation of frameless glass door metal veneer wood base support: nail square wood on the original embedded wood brick, or nail square wood through expansion bolts to fix the square wood on the ground, then use all-purpose adhesive to stick the metal trim board on the wooden square.
4. Install the rigid door frame: nail the square wood of the door frame according to the center line of the bullet, and then use plywood to determine the fixed size and position of the door frame column. When fixed, the metal decorative surface will be outsourced.
5. Installation of glass door leaf of frameless glass door: use glass suction tray (or glass suction tray) to suck the thick glass tightly, then hold the suction cup to lift the thick glass plate through 2~3 people and stand it up and move it to the installation place to prepare it in place.
6. Glass fixing: the inner and outer nails on base support Wood hold the thick glass in the middle, but leave a gap of about 4mm from the thick glass plate, then apply a brush on the flat wood strip all-purpose adhesive stick the facing metal plate on the square Wood and two flat wood strips.
7. Note silicon sealant sealing: inject base support into the gap on both sides of the top root slot and on both sides of the glazing rebate silicon sealant, as well as the opposite seam between the thick glass and the door frame column.
8. Docking between the glass of frameless glass door: the thick glass plate of the fixed part must be assembled with two or more pieces due to the width of over dimension. The alignment and splicing of the two pieces will inevitably form a joint, 2~3mm distance should be left for joints.
Installation points of frameless glass door
1. Before all installation steps begin, it is necessary to ensure that other processes of interior decoration and decoration can be carried out after the construction is basically completed, and when setting out the line and positioning, it should be carried out in strict accordance with the requirements of the design drawings.
2. The width of the limit groove at the top of the frameless glass door frame should be greater than 2~4mm of the glass thickness, and the groove depth should be between 20~30mm for glue injection.
3. When outsourcing metal decorative surface, the facing butt joint should be placed in the middle of both sides of the glass installation. The joint position must be accurate and vertical.
4. When installing the glass door leaf of frameless glass door, the positioning method is: the upper part of the glass should be inserted into the limit groove at the top of the door frame, and then the lower part of the glass should be placed on the right center line on the base support, and the installation position of both sides of the door frame is good, so that the two sides of the thick glass just seal the metal facing seam of the door frame, and it is required that the inside and outside can not see the facing seam.
5. When filling the silicon sealant seal, the injection sequence should start from the end of a gap to the end, and there should be no pause in the middle.
6. During the docking process between the glass of frameless glass door, the glass cut of the joint must be reversed, and after the glass is fixed, silicon sealant should be used into the gap, after filling, squeegee should be leveled with plastic sheet to make the gap form a clean and uniform straight line. Clean the glue on the glass surface with a clean cloth.
After carefully reading the installation method and key points of frameless glass doors mentioned above, I believe that when installing frameless glass doors in your own home, the overall decoration effect will not be damaged due to the installation master's mistakes or negligence. If there are mistakes, you can see some by yourself without feeling unconscious, until the master who installed the frameless glass door evacuated, he realized that it was not so perfect.
