Although King Kong car window shade is good, its installation is not good, and its effect will be greatly reduced. Although King Kong car window shade is easy to install, there are also some things to pay attention to. Interested friends, you can learn to install diamond net security window by yourself. The installation steps of King Kong car window shade are as follows:
in summer, I believe many owners will have a more troublesome thing, that is, although there are air conditioners, there are still many mosquitoes in their homes. In this case, many families will install car window shade to prevent mosquitoes. However, after installing King Kong car window shade, many families find that there are obviously fewer mosquitoes, which shows that the car window shade effect of King Kong Anti Mosquito is very good.
Although King Kong car window shade is good, its installation is not good, and its effect will be greatly reduced. Although King Kong car window shade is easy to install, there are also some things to pay attention to. Interested friends, you can learn to install diamond net security window by yourself. The installation steps of King Kong car window shade are as follows:
1. Installation steps of King Kong car window shade
1. Preparation for installation of King Kong car window shade
(1) first check the quality of diamond network, whether there are any major loopholes or abnormal problems, if not, you can confirm the receipt.
(2) prepare a kit for installing diamond net security window, such as scissors, hammer, tape, double-sided tape, etc.
2. Installation process of King Kong car window shade
(1) first paste magnetic stripe on the edge of the Diamond Net anti-theft window, do not paste at will, the edges of the two should be aligned, the whole should be neat, do not tilt and fold, take out the scissors, slide one hand from top to bottom and fall on the bottom of the window to reduce the remaining part, but keep a little length to avoid after installation.
(2) then take off the paper on the plastic strip, paste the plastic strip to the corresponding magnetic stripe connection net, and then press the clip firmly with the plastic strip to make it tightly connected and add bonding capacity.
(3) remove the four corners of the paper, lift the foot handle, let it continue to paste, and then clip the two clips on the mosquito net to the position of the foot handle by two inches.
(4) first press the clip by hand, wait for a few seconds, then remove the top strip of the clip, let it stick to the iron window, and then press the clip by hand to increase its viscosity.
2. Precautions for installation of King Kong car window shade
1. Before installing the diamond screen, you need to measure the size of the window first. If you are afraid of measuring, you can measure it again. You can understand the data by comparing it, and then buy the screen of the corresponding size, you can buy bigger and easier to install.
2. Get the window screen behind the scenes. You need to measure the size of the window screen again to check whether it is suitable. If possible, clean the dust on the surface of Diamond net security window for easy installation.
3. Do not cut the screen directly, fix it on the window first, and then cut it according to the window size.
The installation steps of King Kong car window shade and some places that need attention are introduced here. Interested friends can learn to install diamond net security window by themselves. If you have more questions about King Kong car window shade and the knowledge of doors and windows, you can continue to pay attention to Zhonghua door and window network to learn more about related knowledge.
(Article Source: Luban home Zhihu, invasion and deletion)
