Four Common Methods for Removing Doors and Windows Silicon Sealant Are Very Practical


The decoration situation of each family is different, and the type of choosing silicon sealant is also different. In addition to the characteristics of glue, I believe that everyone has a lot of doubts and troubles about how to deal with silicon sealant touching clothes or hands. The editor summarized several common methods of removing doors and windows silicon sealant for your reference.

Silicon sealant is mainly used for glass installation and is a common material in decoration. The decoration situation of each family is different, and the type of choosing silicon sealant is also different. In addition to the characteristics of glue, I believe that everyone has a lot of doubts and troubles about how to deal with silicon sealant touching clothes or hands. The editor summarized several common methods of removing doors and windows silicon sealant for your reference.

How to remove doors and windows silicon sealant?

I. Doors and windows on the glass silicon sealant

1, we can pass a useless credit card, when it is a little hardened, along the glass surface, gently scraping, will scrape down. Because the credit card is soft, it is not easy to hurt the glass surface, it is OK to use a coin of 1 yuan, but the metal one should be careful.

2. If the area of glass adhesive is very large, you need to go to the hardware store to buy a putty knife. After sharpening it, scratch it carefully. If the area is small, just use scissors to gently scrape. Or take banana water and gently rub it for many times, the Edge will melt off, and then you can cut it with a knife without leaving any trace.

3. Wire brush can be used to brush the pot, which is very easy to use and scratch.

4. If there is a layer of grease on the glass after scraping, it will be gone after wiping it with cotton cloth with gasoline or solvent naphtha.

5. If it can't be torn off, you can turn the hair dryer on the hot gear and tear it towards the edge of the self-adhesive paper. In this way, there is generally no glue left. Even if there is, there are few, wind medicated oil can be used for chemical reaction. If you tear off a large piece of glue, stick solvent naphtha of it with Mao Jin (or the thinner used for paint can be sold for less than 5 yuan per bottle in hardware groceries or paint sales places) draw a circle to wipe the glue.

II. Doors and windows on clothes silicon sealant

if it is attached to clothes, you can consider brushing it with a brush. If it still cannot remove silicon sealant, you must consider banana water.

3. Doors and windows on hand silicon sealant

1. Cotton silk occupies kerosene or gasoline, wipe it clean, and then wash hands with soap, alkaline noodles or washing powder;

2. Wipe off large pieces of paper, then add a little water with alkaline noodles or washing powder, rub them thoroughly repeatedly, and wash them clean;

3. Wipe off large pieces, fully dry them, and then rub them off. Silicon sealant after the solvent is dried, a film is formed.

IV. Doors and windows on the floor silicon sealant

the method of removing silicon sealant varies depending on the floor. If it is a porcelain tile, it is more convenient to remove it. Just use a knife or scissors to gently scrape it. Wooden floor is more troublesome. You need to soak the sponge in boiling water until it heats up, dry the water slightly, wipe it several times, and silicon sealant will wipe it off frequently.

These are several common ways to remove doors and windows silicon sealant. I believe that users should no longer be confused about how to deal with silicon sealant touching clothes or hands.

(Article Source: door and window city-public number, invasion and deletion)