Wooden door installation is a technical work. Many people don't know much about it and ask someone to install it. However, if the installation personnel don't install it properly, you don't know how to check it. This and that problem will definitely occur in the future, it will disturb you for a long time and even affect your normal life.
Wooden door installation is a technical work. Many people don't know much about it and ask someone to install it. However, if the installation personnel don't install it properly, you don't know how to check it. This and that problem will definitely occur in the future, it will disturb you for a long time and even affect your normal life. After the wooden door was installed, there was a phenomenon of automatic closing. I don't know what caused it. After inspection, experts found that the measurement results had a great influence on the installation quality of wooden doors. Just let me tell you the problems and solutions of wooden door installation.
After measurement, it is relatively easy to install the customized wooden door. According to the introduction of the supervisor of TATA wooden door installation after-sale department, as long as the measured hole data is accurate, there will not be too many problems in the installation, although there are questions about whether it is convenient to use, more importantly, it affects the appearance.
First, the door auto switch.
1. Phenomenon: some doors will open or close automatically. Under normal circumstances, if the installation is in place and the wall is straight, the door can stop in any direction when it is opened, and it will not automatically open or close.
Crux: 1) the vertical direction of the door is not safe; 2) in the old house, some walls are not standard, and the thickness of the wall at the opening is inconsistent.
Solution: during installation, workers can use infrared level to ensure that all lines of the door are vertical. The thickness of the wall should be carefully measured during measurement and leveled in time.
Second, it is inconvenient to push and pull wooden doors.
Phenomenon: in winter, the door crack will be too large, and in humid summer, the wooden door will be difficult to open.
Crux: wooden door has the property of wet expansion and dry contraction. If the door seam is left untimely, this situation will occur.
Solution: Generally speaking, in the longitudinal crack of the door, the seam under the door should be 8-12mm, leaving too much light, which affects the sound insulation effect and is not beautiful; leaving too little will lead to the difficulty of opening wooden doors after wet expansion in summer or falling down for a long time. The horizontal door seam should be left 5mm, usually 2mm on the hinge side and 3mm on the lock side.
Third, door casing has a seam with the wall.
Phenomenon: after door casing is installed, it does not fit perfectly with the wall, but there are some gaps.
Crux: this is related to the thickness of the wall. If the thickness error on both sides and above the wall of the opening is not large, there will be cracks.
Solution: White silicon sealant can be marked.
After the workers are installed, the owner can check the door seam by himself: close the door, check whether the door seam is balanced, and whether there is a situation where one side is wide and the other side is narrow. If it is not balanced, it means that the door frame is not correct, it affects the appearance.
