The standard ones on the market are double glazing unit, that is, two layers of glass, so is it necessary to choose broken bridge aluminum for Triplex glass? What are its advantages and disadvantages? Listen to the analysis and interpretation of professionals today. First of all, we need to know what is double glazing unit, what is three-layer hollow glass, and how to zone
The standard ones on the market are double glazing unit, that is, two layers of glass, so is it necessary to choose broken bridge aluminum for Triplex glass? What are its advantages and disadvantages? Today, listen to the analysis and interpretation of professionals. First of all, we need to understand what is double glazing unit, what is three-layer hollow glass, and how to distinguish?
Double glazing unit is to separate the two pieces of glass by effective sealing material sealing and spacing material, and there is a desiccant that absorbs water and gas between the two pieces of glass, so as to ensure that the hollow glass is a dry air layer for a long time, anhydrous gas and dust exist; At the same time, hollow glass is easy to carry out mass industrial production, so hollow glass is a product used by a large number of recommend in new buildings.
Three-layer hollow glass refers to the hollow glass with three pieces of glass combined together, which has one more layer of glass and aluminum strip than double-layer glass. What are the advantages of three-layer hollow glass? The three-layer hollow glass is well insulated and sealed, with higher safety factor than the two-layer hollow glass, and better sound insulation and thermal conductivity. In terms of sound insulation, double glazing unit is similar to Triplex glass, if three-layer hollow glass is configured, of course, it is better than double-layer glass, and Triplex glass can effectively block the conduction of low temperature.
Using Triplex glass is an effective way of environmental protection and energy saving. Triplex glass greatly reduces the load of heating (cold) air conditioning. Obviously, the larger the window area, the more obvious the energy saving effect of three-layer hollow glass. Three-layer hollow glass is better than double glazing unit in heat preservation, heat insulation and energy saving.
What are the disadvantages of broken bridge aluminum Triplex glass? The disadvantage is that Triplex glass has an extra layer of glass, which is heavier than double-layer glass, so the requirements for hardware are very high. If you choose general brand hardware, it is not recommended to configure Triplex glass, otherwise Casement will fall, it is difficult to repair the switch, so broken bridge aluminum Triplex glass must be equipped with domestic high-quality hardware or imported hardware, and the width and height of Casement should not be too large.
To sum up, broken bridge aluminum Triplex glass is better than double glazing unit in heat preservation, heat insulation, energy saving, etc., so consumers with conditions can choose Triplex glass or better three-layer hollow lowe glass, both the southern region and the northern region are applicable to Triplex glass, which is not only applicable to the northern region or the cold Northeast region; On the contrary, the editor thinks that the southern region needs Triplex glass more, because the southern region is hot in summer, it is cold in winter and there is no heating. At this time, we hope to keep the windows warm, thus reducing the energy consumption of air conditioning and cooling and heating costs in summer and winter.
