Electric garage door is a product that opens the door easily by remote control when the vehicle enters and exits, but this kind of door occasionally breaks down during use, how should we deal with this kind of small fault?
1. Garage door cannot be completely closed or opened incompletely.
Maintenance method: re-position the travel switch of the electric garage door to increase the switch stroke of the garage door.
2. The garage door is remote control insensitive and can only be used if it is close.
Maintenance method: extend the antenna to the outside of the garage door or extend the antenna to the outside of the driver and straighten the antenna. If it is not enough, it means that a new battery needs to be replaced.
3. Garage door remote control fails, but it can be opened by manual switch.
Maintenance method: complete remote control code pairs according to the instructions in the manual. If necessary, replace the internal battery of remote control. If it still cannot be solved, please ask professional maintenance personnel to check the receiving control panel in time.
4. When the garage door is opened and closed, the running noise is too loud.
Maintenance method: fasten the hardware of the garage door and confirm that there are no screws loose; Adjust the pull rod of the driving device and the center line above door body.
5. When the garage door is opened, the garage door body passes through the position of the travel switch.
Maintenance method: check the travel switch and travel switch wiring of garage door.
6. Garage door remote control cannot normally open the garage door drive device.
Maintenance method: check the socket, plug, manual switch, Fuse Fuse; Check the manual switch and remote controlling receiver wiring, and reposition the travel switch to increase the stroke.
The above six points are a small way to repair minor faults of electric garage doors. I don't know if you have learned it?
