Family inner door is frequently used and easily damaged. If you can use more brains and master some tips on use and maintenance at ordinary times, it will bring convenience to life. Here are some tips for inner door maintenance.
How to maintain inner door? Inner door maintenance tips
inner door maintenance tips
1. Self-made Elastic Block inner door pieces
the door of the home often needs to be switched. When the door is opened, it often hits the wall directly. After a long time, the lock box and handle on the door are easy to touch marks on the wall, damaging the wall and door, it affects the appearance. So, how to deal with this problem? We can find a piece of rubber block which is about 5cm thick or nail a thick rubber on the small wooden block, and nail it to the corner of the door on the side of the hinge, so that the door and window will not be damaged.
2. Keep the door from being blown open by the wind
if the door in the home is easy to be blown open by the wind or not opened, it is inconvenient and unsafe. We can find a strong magnet of suitable size, which is buried flat at about 1/4 of the height of the door above the door frame, and then nail an iron sheet on the place where the door leaf matches the door frame, after closing the door, it can prevent the door from being blown open by the wind. Cupboard, wardrobe, window and other places can also be treated by this method.
3. Hoodle door lock anti-astringency
hoodle the door lock is used for a long time, and it will often be dry and fail, and it is not easy to open and close. In this case, you can drip oil on both sides of the movable lock or wipe it with soap a few times, and the door lock will be flexible and flexible to open and close freely.
4. Inner door are afraid of water
if it is really soaked in water, it is generally very troublesome, but for the moisture-proof problem, inner door of the finished products are doing well at present, and crass has also done more in-depth things, for example, there are moisture-proof layers on the facade of crass, which will reduce the problem of waterproof by inner door. Pay attention to the kitchen and bathroom, and do not accumulate water, especially at the bottom of door set.
5. Heating in winter
the room should not be too dry, and the humidity in the air should be kept at about 40%, which is the best for the floor, inner door, and even the home. Keep the indoor ventilation well and keep the inner door under normal room temperature and humidity to prevent wooden products from deformation due to humidity and excessive temperature difference, corrosion and rust of metal fittings, edge sealing and peeling of decorative materials. When using electric heater or other heating installaion in winter, keep away from wooden products to avoid heat deformation.
6. Inner door paint is afraid of bumping
inner door paint is afraid of bumping, so pay attention to impact protection.
7. When painting the wall, cover the inner door
in order to avoid the paint falling on the surface of the product, make the finishing material peel off and fade, affecting the overall appearance. Inner door is a solid wood skin, very inflammable.
8. Hinge. Lock is an activity accessory
when loosening occurs, it should be tightened immediately. If the hinge position is noisy, it should be filled with oil in time. If the lock is not flexible, add a proper amount of pencil leads to the keyhole, and do not fill oil casually.
