In modern urban life, choosing a suitable window for the family seems to be a technical activity. Usually, we always feel dazzling when facing all kinds of door and window products in the market, and we don't know how to choose a window with perfect appearance and excellent performance for our beloved residence. Especially like villas and luxury houses, it is more important for high-end hotels to choose suitable doors and windows brands. In order to improve everyone's understanding of aluminum clad wood doors and windows, Xiao Bian here brings you six skills on how to distinguish the quality of aluminum clad wood doors and windows.
The first point: we usually say that good windows have smooth linear, perfect and flat paint surface and smaller wood color difference. Dios doors and windows are designed with Chinese famous brand manganese magnalium, with first-class surface treatment and classic fashion.
The second point: the sealing adhesive strip should have good flexibility, flexibility and aging quality resistance. The best choice is the high-quality sealing strip with high EPDM content. The adhesive strip at the corner should be tightly installed, and the alignment should be smooth, and the strength and air tightness should be distinguished. Between the outer frame of Dios doors and windows and inner fan, isobaric and decompressed original miles are used, and EPDM sealant strip is provided. Its sound insulation, heat insulation, waterproof and air tightness are better.
Third point: related operations. In terms of operation, the hardware structure must be weight capacity strong, and it must be opened and closed flexibly. In addition, it must be tightly connected, with good air tightness and hydrophobic properties. The hardware installation must be firm and cannot cause hand shaking, it can be easily turned on and off. Dios adopts imported hardware accessories, and the jockey pulley of the bottom bearing force system can reach 300KG. Even when the door leaf is large, it can be pushed and pulled smoothly, calm, without noise, reaching the national wind pressure resistance standard, and realizing the requirements of ultra-wide and ultra-high.
The fourth point: distinguish the diagonal connection between the glass bead and the wood bead. First of all, the gap should not be greater than 0.5mm, and it needs to be flat without sculptural feel. Secondly, the angle of the 45-degree angle of the outer aluminum should be flat without uneven and uneven hand blocking, the relative gap is less than 0.5mm.
The fifth point: Observe the paint, the choice of paint must be special paint for doors and windows, the current market situation needs to use water-based paint, to have good texture and tightness, but also to resist UV resistance to yellowing and fading, and spray evenly without chromatic aberration and dust-free particles. It is best to control the chromatic aberration of wood joints within 0.2 °.
Point 6: the overall thickness of aluminum clad wood doors and windows needs to be appropriate. The overall thickness of the profile should not be less than 14mm. Otherwise, the strength of the outer aluminum will be too low, and the outer aluminum will be deformed or fall off during use, and then affect the use of Windows.
