There are mainly the following reasons for door set mildew
1. Finish the cement on the ground and wall, and finish door set without being completely dry. The wood board is damp and moldy;
2. The basic level is not moisture-proof or anti-corrosion treatment;
3. Door set direct contact with the ground, long-term penetration of water vapor leads to mildew, and contact with cleaning and mopping the floor is also prone to moisture.
Therefore, before construction on door set, make sure that the wall surface is dry and do a good job of moisture-proof and anti-corrosion at the base.
Door set foot stone design: referred to as the door foot, this practice can play a role of waterproof and moisture-proof in order to prevent wooden door pocket from landing.
The door set used to make oriented strand board base layer is more than 50mm from the ground, and the distance between door set and the ground is determined to be 150mm?
Door set reserved Stone position during installation?
The stone is installed below the door set so that the door set does not directly touch the ground and will not be affected by moisture from the mop when mopping the floor, making the door set more durable. If Stone door set is used, I believe it can be done once and for all?
Editor: China Door Industry Network -- 27
