"Injured" door, do this
⊙ treatment of wooden door scratches: If the wooden door is accidentally scratched but does not touch the wood below the paint film, a soft cloth can be stained with a little melted wax solution, painted on the paint film wound and covered with scars. After the wax becomes hard, apply it again. If you apply it several times over and over again, you can cover up the film scars.
⊙ remove the oil and ink on the wooden door: you can add two parts of white vinegar to one part of water, wipe the oil and ink on the wooden door with sponge and mixture, then clean and dry it.
⊙ clear water marks: water marks usually take a period of time to disappear. If it is still visible after a month, wipe it along the direction of wood grain with a clean soft cloth coated with a small amount of salad oil or mayonnaise. Or you can use a wet cloth to cover the trace print, and then carefully press the wet cloth with an electric iron for several times to dilute the trace print.
⊙ remove oil stains from wooden doors: residual tea is an excellent detergent. After wiping, spray a small amount of corn powder for a test, and finally wipe corn powder clean. Corn powder can absorb all the dirt adsorbed on the wooden door surface, making the paint surface smooth and bright.
⊙ white or light-colored wooden doors turn yellow: The white or light-colored paint on the surface of wooden doors will change color for a long time. You can use a rag to touch toothpaste for a test;
⊙ protection hardware accessory: just wipe gently with a dry cloth, and do not use detergent containing chemicals. Remove the sticky paper: Completely soak the paper with salad oil, and gently wipe it with steel wool special for wooden doors according to the direction of wood grain after a few minutes. Polish after drying.
⊙ fade burn marks: cigarette butts or unextinguished matches leave gas mark on the paint surface of wooden doors. If the paint surface is burnt, you can wrap a layer of fine-grained hard cloth on the matchstick or toothpick and gently wipe the marks, then apply a thin layer of wax to dilute it by gas mark.
⊙ scratch: If the paint surface of the wooden door is scratched and the wood under the paint is not touched, crayon or paint of the same color as the wooden door can be applied to the wound surface of the wooden door to cover the exposed background color, then apply a thin layer of transparent nail polish.
⊙ removal of Styrofoam: extra solid wood door stuck on the surface of Styrofoam is a common thing in the installation process of solid wood door. Once you accidentally put Styrofoam on the surface of the wooden door, remember not to rush to wipe off the Styrofoam immediately, don't worry about it first. After Styrofoam is completely cured, just use hand lever to buckle it down without leaving obvious marks. Otherwise, the more you wipe, the more sticky it is everywhere, it's a mess.
Editor: China Door Industry Network -- 27
