Hanging or installing a wooden door is actually not as difficult as it seems. If the door core of the new door is as big as that of the existing door, it will be easier to replace the existing door. If you buy a matching door, you don't have to make your own door frame, so it will be very easy to install a door on the new partition wall. In fact, if you have prepared the necessary materials and tools, it is very possible to complete the home improvement project within one or two hours.
Installation supporting door
Wooden doors are the easiest to install. These doors have been installed in the entry box, and one side of the door frame has been decorated with table bar. Usually, the hardware has been installed, which makes the door installation process easier.
If you want to buy wooden doors, then you need to know the rough size of the door opening. For the convenience of installation, there should be about 7.6cm beside the two side columns of the door, while 3.8cm beside the support pillar. The following are the steps to install the supporting door:
Step 1: put the door horizontally into the door hole, keep the side column of the door in the vertical direction, and then fill all the gaps on the top and side with cedar wood thin gasket.
Step 2: Use 16d furniture nails to pin the top and side posts into the door frame. Then use nail set to bury the nail head into the cross section of the side column. Use wooden putty to block the countersunk hole. Wish
Step 3: use 10d furniture nails to nail the polished outer frame or table bar into the door frame. Drive the nail head into the countersunk hole and fill it with wood putty.
Step 4: brush wood hole filler on both sides, top and bottom of the door. The outer frame and door table bar should also be painted with wood hole filling agent.
Editor: China Door Industry Network -- 27
