The correct installation and maintenance of wooden doors is the key link to ensure their excellent use effect. Therefore, in the installation of wooden doors, professional personnel should carefully measure and operate them accurately, grasp all procedures in the installation, and explain the precautions for use and maintenance to users in time after installation.
1. Wooden door installation knowledge
1. Please place the goods horizontally on the ground and do not lean against them.
2. The products to be painted should be painted within five days.
3. Try to avoid outdoor sunlight for a long time and prevent wooden doors from heating.
4. Keep the indoor air circulating to prevent the wooden door from being damp frequently.
5. Prevent the wooden door from abnormal impact, and do not use too much force when it is closed.
6. It is forbidden to nail heavy objects on the door.
II. Installation sequence of wooden doors
1. Assemble door set.
First, find out the door set and vertical plate, and apply glue to the interface according to the back number.
2. Install door set.
Put the whole assembled door set into the door hole, and use small Batten to roughly fix all around the door set. The two sides of the door set should be on the same plane as the wall, and then check whether the whole door set is perpendicular to the ground, door set whether the two corners of the roof and the two riser are right angles or not, and whether the door set is bent or not, twist both ends of the iron sheet to cover the wall.
3. Install the door leaf.
Open the hinge slot first, and the distance between the hinge slot and the two ends of the door leaf should be 1/10 of the height of the door leaf.
4. Install the door lock.
After installation, check whether the door leaf and door interlock switch are flexible, whether the gap is flexible, and whether the gap meets the specifications.
5. Install door casing.
Cut the cathetus with door casing into 45 degree angle, trim with woodworking, insert the cathetus into the door cover slot, and stick the floor glue to the door cover with door casing.
6. Install the door stopper at the corresponding position.
3. Wooden door installation skills
When installing wooden doors, first check whether all parts of wooden doors are complete, whether the dimensions of each part are correct, and whether the corresponding positions assigned to each set of doors are consistent with the door opening ruler.
IV. Wooden door installation and acceptance work
1. The picking mouth is consistent and not misaligned.
2. Door leaf, door interlock switch flexible.
3. The gap between the left and right of the door leaf is consistent.
4. Door set vertical motherboard should be perpendicular to the horizon without bending phenomenon.
5. Door casing close to the wall surface.
6. No damage to the decorative surface.
7. Clean the full set of solid wood door after it has been installed, and teach the user acceptance.
Editor: China Door Industry Network -- 27
