For young people who decorate houses, the process of installing wooden doors is a very critical and important step. How to install wooden doors smoothly, there are many problems and details that need our attention. For many young people who do not understand the installation of indoor wooden doors, when the technical workers installed the wooden boards, we should check and inspect the wooden doors. So in the process of saying this, according to what standards do we judge whether these departments are qualified for installation? Therefore, the next editor will discuss in detail the questions raised by friends about what preparations are needed for the installation process of wooden doors and how to correctly check and accept them.
First of all, what are the installation standards for wooden doors?
When workers install the indoor wooden door, we need to carry out a standard inspection. The first place to check is the installation of door set. Under standard conditions, door set. The standard requirement should be its Assembly, the connection is tight and smooth, and there is no between it and the door, there is a big gap, and door set fixed accessories should be tightly attached to the wall. The shape of door set should be horizontal, flat and vertical, which is an extremely standard rectangular shape. Next, we need to check the installation of the door leaf. First, we need to observe from the appearance that the door leaf is flat and vertical. When opening and closing the door, she can rotate freely without any noise and looseness. At the same time, we should also observe that the bottom of the door should be parallel to the ground. The analysis is about 6 to 7mm, and there is no looseness or contact with the ground during the process of opening and closing the door. The above situation does not occur, indicating that the installation is relatively complete.
Precautions for installation of indoor wooden doors
For young people who decorate for the first time, there may be some sudden situations during the installation of wooden doors, so in order to avoid these unnecessary accidents, how to pay attention to some small matters when busy. First of all, when installing the door frame, everyone should pay attention not to drag the door frame hard. According to the material of the door frame, choose the appropriate fixing method to fix it on the wall. If the material of the door frame is MDF, then we should use screws to connect with the Wall carefully. If the material of the door frame is multi-layer wood board or other solid wood boards, it can be fixed with iron nails of appropriate length. At the same time, in the process of installing the door frame, observe the opening direction of the door in advance. Don't find that the door is installed backwards because of a temporary negligence. Such a low-level mistake will make people headache and discouraged. Therefore, we should try our best to avoid these situations.
The above is the installation of indoor wooden doors, although it is methods and advices to some of the installation emphasized by everyone. The solid wood door installation process is very simple, but pay attention to some small details during the installation process, which will make the wooden door installation process more smooth. I hope the methods and matters mentioned above can be helpful to everyone.
Editor: China Door Industry Network -- 27
