Wood gives people natural, environmentally friendly, healthy nature and original beauty. Now many families will choose to install wooden doors inner door. From the color point of view, it lies in its natural wood color. Wood-colored home decoration is natural and free of chemical pollution. With the continuous improvement of modern people's requirements for quality of life, this is definitely the best choice for modern healthy life, it also meets the psychological needs of modern urbanites advocating nature. In order to make the final effect conform to the original intention of installation, the installation should conform to the standard. Let's take a look at several wooden door installation specifications.
I. Installation conditions
1. Some inner door installation will adopt the method of side installation and side opening, and the hole must be reserved before installing the wooden door. Measure the size of the wooden door in front of the reserved hole;
2. The installation of wooden doors should be carried out after the completion of floor tiles, stone and other projects, so as not to damage the wooden doors during the process of laying tiles; Wooden doors cannot be affected with damp and easily deform after being affected with damp, before installation, check whether the wall is damp. If there is moisture, conduct moisture isolation in advance;
3. Brush anticorrosive paint on the side of the door frame against the wall.
II. Installation preparation
1. Tools: electric hammer, woodworking hammer, flat file, edge planer, fine tooth saw, screwdriver, Angle Square, tape measure, plumb bob, electric drill, Tapper, stamp, and drill with corresponding specifications;
2. Material: Check whether the specification, model and quality of the wooden door to be installed meet the requirements (wood moisture content ≤ 12%), and check the factory certificate;
3. The purity of the preservative shall not be less than 95%, and the fineness shall be all passed through the screen of 1600 holes/cm2. Embedded parts, wood bricks and other connectors used to fix the door and window frame in the wall should meet the design requirements. The type, specification and model of hardware and its accessories must meet the requirements of the drawings and match with the door and window frame. And the product quality must be qualified products.
III. Acceptance criteria
1. There is no dislocation of the wooden door interface, the overall effect is good, and the opening direction and function all conform to the original design standards;
2. Open and close the installed wooden door several times to check whether the installation is firm and flexible;
3. Correct measures for fire prevention, moisture prevention and sound insulation;
4. The gap between the door frame and the wall is fill plug full, uniform, dense and smooth;
5. Hardware (nails, screws, iron wires, locks, hinge, latches, springs, etc.) are complete, and the specifications meet the requirements.
The above is the wooden door installation specifications, I hope to help you.
Editor: China Door Industry Network -- 27
