All kinds of beautiful wooden doors have attracted the favor of consumers. After successfully purchasing wooden doors, the installation of wooden doors is also a difficult problem for consumers. Correct installation of wooden doors can not only ensure the quality of wooden doors, it also ensures the long-term use of wooden doors. What problems should be paid attention to when installing wooden doors?
Wooden door installation skills
1. Assembly door set
first, find out the door set and vertical plate, and apply glue to the interface according to the back number.
2. Install door set
put the whole assembled door set into the door hole, and use small Batten to roughly fix all around the door set. The two sides of the door set should be on the same plane as the wall, and then check whether the whole door set is perpendicular to the ground, door set whether the two corners of the roof and the two riser are right angles or not, and whether the door set is bent or not, twist both ends of the iron sheet to cover the wall.
3. Install door leaf
open the hinge slot first, and the distance between the hinge slot and the two ends of the door leaf should be 1/10 of the height of the door leaf.
4. Install the door lock
after installation, check whether the door leaf and door interlock switch are flexible, whether the gap is flexible, and whether the gap meets the specifications.
5. Install door casing
cut the cathetus with door casing into 45 degree angle, trim with woodworking, insert the cathetus into the door cover slot, and stick the floor glue to the door cover with door casing.
6. Install the door stopper at the corresponding position
precautions for wooden door installation
1. When using wooden doors, do not hang heavy objects on the door leaf or avoid sharp objects from bumping or scratching.
2. When opening or closing the door leaf, do not push too hard or the opening angle is too large to avoid damage.
3. When maintaining wooden doors with glass, be careful not to penetrate detergent or water into the gap of glass layering to avoid deformation of layering. Do not use too much force when wiping the glass to avoid damage and personal damage. After the glass is damaged or there is a big bump, please ask professional maintenance personnel for maintenance.
4. When removing stains on the surface of wooden doors, use soft cotton cloth to wipe, and it is easy to scratch the surface with hard cloth. When the stains are too heavy, neutral detergent, toothpaste or special detergent for furniture can be used, dry immediately after decontamination agent.
5. Pay attention to soaking neutral detergent or cloth containing high moisture level. Do not place it on the wooden door surface for a long time. Otherwise, it will damage the edge surface and make the surface discolored, aged or peeled off.
6. Do not touch high temperature objects to avoid damage.
7. Pay attention not to too much friction at the corners of the wooden door, otherwise the paint will fall off.
8. When removing dust from wooden products, it is inconvenient to use soft cotton cloth to erase them, vacuum cleaners can be used to remove them. In order to maintain the surface gloss and service life of wooden doors, cleaning and dust removal should be carried out regularly.
9. In order to maintain the bright color of wooden doors, furniture maintenance wax should be used regularly for maintenance.
10. When using wooden door products, try to keep the relative humidity of indoor air between 60% and 75%. In spring and winter, pay attention to good indoor ventilation and keep indoor humidity, make the wooden door under normal room temperature and humidity to prevent the product from deformation due to excessive wet temperature difference, corrosion and rust of metal fittings, edge sealing and finishing materials from falling off. When using electric heater or other heating installaion in winter, keep away from wooden products to avoid thermal deformation or surface damage.
11. When the hinge and lock frequently move parts are loose, they should be tightened in time, and the sound of the hinge position should be filled with oil in time. When the lock is not flexible, a proper amount of pencil leads foam can be added to the keyhole, do not inject lubricating oil casually.
12. Measurement of door opening: Measure the distance between the left and right of the door opening horizontally, and select more than five measuring points for measurement, among which the minimum value (minus the adjustment margin of the door frame) is the extension size of the door frame; the tolerance is within the range of-15cm 1 + l5cm; If the measured value error of the five points is greater than 20mm, the user should be required to trim the opening. Vertically measure the distance between the door hole and the door hole, and select more than three measuring points for measurement, among which the minimum value (adjustment margin of the door frame) is the extension size of the door frame; The tolerance is-5mm + l0mm; if the measured value error of the three points is greater than 10mm, the user should be required to trim the opening.
