The installation quality of wooden doors is related to the problem of service life and smooth daily use, so we need to pay attention to some details during the installation process. Among them, wooden door pocket is not only the function of a decorative door, but also can protect the wall from being damaged. Here are wooden door pocket installation precautions for everyone, so that every step can be perfectly installed.
1. More than wooden door pocket is made of density plate, and the thickness is between 15mm-30mm. Although density plate is easy to process, after a long time of use, the wooden door will form falling, cracking, and lax closing, it means that the quality of wooden door pocket is not good, so pay attention to the better quality when purchasing.
2. Remove the outer packaging of wooden doors and check whether the door set, door casing, gear door strip and other parts are neat. The missing parts should be filled in time. Avoid direct sunlight, prevent wooden doors from heating, and avoid external impact or contact with corrosive substances.
3. Before installing the wooden door, confirm the size of the wooden door and the size of the installation position again, and re-measure it to see if the data of the wooden door is consistent with that of the wooden door pocket and before the order, this also facilitates cashing and cutting. If there is any non-conforming size, it should be handled immediately to ensure that the construction is carried out on time.
4. When assembling door set, the joints between the horizontal frame and the vertical frame should be fixed with corresponding glue, and then fixed with screws.
5. Locate the position of door set. Door set should be in place according to the elevation line in the space. Use tooling and wooden wedge to hold wooden door pocket tightly, and then adjust the vertical and horizontal angle of wooden door pocket door set, to ensure the formation of 90 degree angle, generally, 2.5mm-3mm distance can be reserved between wooden door pocket and door leaf, and 5mm-8mm distance can be reserved between door leaf and ground.
6. After the position of wooden door pocket is determined, Styrofoam need to be filled. At this time, attention should be paid to cleaning up the wall, and the wall can only be filled with Styrofoam after being wet. The amount of filling should be appropriate, and the surplus needs to be cleaned up.
7. It takes 4-6 hours to cure after filling Styrofoam, and then start the next installation. Remove the previous tooling and wooden wedge, insert door casing into the door cover with glue, and tap to make the two closely fit.
Wooden door pocket although there are many Installation Precautions, more consideration can ensure the installation effect of wooden doors. Finally, one thing to be noted is that when all parts of the wooden door are installed, cleaning work should be carried out to make the wooden door have a clean environment.
