The door is the portal of the house. The installation effect and quality of the wooden door are related to the daily normal life. If there is a mistake in the installation, it will take time to reinstall it, which will affect the normal life. Moreover, after the wooden door is installed and accepted, it means that the installation project is over. If the acceptance is not careful, it is difficult to solve the problem.
1. The appearance of wooden doors should be smooth and coordinated
After installation, the paint film on the surface of the wooden door is complete. You can also check the quality of the wooden door again, whether it is bright after installation, no obvious quality problems such as bubbles, and no damage. Wooden doors and door set should be of the same material and color coordination. The color difference between trim board and wooden lines should not be too large.
2. Wooden door installation should be vertical and smooth
During installation, if the door panel or the door set of a perpendicular line is not set properly and is not vertical, the wooden door cannot be closed after installation, which increases the amount of work. During acceptance, it should be noted that the wooden door and door set should be vertical and cannot be deformed. The wooden door is consistent with door set and can be nested. If there is a gap, it may be that door set is not perpendicular to the ground during installation or the planing is not accurate. These problems need to be solved before the installation project can be completed.
3. Wooden doors and door set are tightly integrated
Usually, wooden doors and door set are matched, and they should be embedded with each other after installation. Door set. The joint between the fan mortise and the door set wall should be tight.
4. View door set
Door set after installation, there is no air force drum corps bending. You can tap the door set side panel by hand to hear whether there is air force drum corps sound. If there is, it means that there is no base plate such as thin wood board when installing the underlying layer, in this case, the door is not firm and accidents are easy to occur in the later stage. The base plate should be removed and reinstalled. Door set vertical motherboard is perpendicular to the ground, and no bending can occur.
5. Check the opening of the hinge door lock
When the wooden door is closed and opened smoothly, the first thing is that the hinge of the door is firmly installed. Combined with testing whether the door lock is opened and locked smoothly, the two parts locked on the board and the door set should be consistent, otherwise the door cannot be closed and it is not easy to lock. Finally, pay attention to whether the opening direction of the door meets the requirements.
The installation and acceptance of wooden doors is a relatively detailed work. From the overall appearance to the details of each joint, it needs to be checked to ensure that no problems will occur during use and avoid the situation of rework and reinstallation later.
Editor: China Door Industry Network-dog thief
