The Installation Method of Solid Wood Composite Makes the Wooden Door More Firm

Different doors have different installation methods, and the matters needing attention in the installation process are also different. Today, let's talk about the installation methods of solid wood composites. Solid wood composite door installation method 1 First build the wall and then build the frame. Before installing the door frame, check the size of the reserved door hole, trim the reserved hole in the direction of the wood surface of brick and the door and window frame, and install it after meeting the requirements; After finishing the vertical of the door and window frame, after the diagonal is flat, use mud nails to fix the solid wood composite door door frame on the wood brick. The installation of solid wood composite door frame should highlight the wall surface, set aside the thickness of the painting layer, and add nail wood strips and other protective materials to the upright door frame to prevent damage and damage. The gap between the solid wood composite door frame and the door hole is filled with cement mortar, and the gap between the solid wood composite door frame and the wall should be controlled at about 10~20mm and embedded with cement mortar. Solid wood composite door frame should be kept in line with the same wall after being installed. Solid wood composite door installation method 2 When installing the door leaf, use one screw to fix the upper and lower sides, check whether the size of the door leaf is appropriate, and whether the door leaf and the door frame are switched freely. After confirming, install the required screws. When trimming the frame of the door leaf, it should be the two opposite doors trimming at the same time, so as to avoid the different width of the edge of the door leaf. The installed door leaf should be flexible when it is switched on and off. The Stand surface of the door leaf should be relatively parallel to the stand surface of the outer frame. Solid wood composite door installation method 3 Make sure that the solid wood composite door leaf and solid wood composite door frame are installed accurately, then remove the gear door line and brush white latex, and then reinstall it. For example, when the gear door line is installed, it is not very firm (the glue is not dry yet) the connection can be assisted by nails with both tips. After installing the door lock, pay attention to the comprehensive inspection, whether the door leaf is flexible and whether the gap is compliant. Finally, the installation environment should be emphasized. During the installation process of solid wood composite door, it is necessary to ensure the cleanliness of the environment and clean up the ground site to prevent some confusion in the operation, in particular, the cross operation of parts will have an impact on the installation process. Professional supporting operation should be used for the installation and use of tools, so that the wooden door can be installed more firmly. Editor: China Door Industry Network-dog thief