Under the influence of various uncertain factors, it is inevitable that the wooden door with good quality will suffer some injuries. So today, the editor summarized some treatment methods to deal with the "injury" of wooden doors. When wooden doors are injured, these can be used.
1. Treatment of wooden door scratches
If the wooden door is accidentally scratched but does not touch the wood below the paint film, use a soft cloth with a little melted wax solution, apply it on the paint film wound and cover the scars. After the wax becomes hard, apply it again. If you apply it several times over and over again, you can cover up the film scars.
2. Remove the oil and ink on the wooden door
You can add two parts of white vinegar to one part of water, wipe the oil and ink on the wooden door with sponge and mixture, then clean and dry it.
Chongqing kunxiu wooden door: Treatment of wooden door scratches
White wooden door decoration effect diagram
3. Clear water marks
Water marks usually take a while to disappear. If it is still visible after a month, wipe it along the direction of wood grain with a clean soft cloth coated with a small amount of salad oil or mayonnaise. Or you can use a wet cloth to cover the trace print, and then carefully press the wet cloth with an electric iron for several times to dilute the trace print.
4. Remove oil stains from wooden doors
Residual tea is an excellent detergent. After wiping, spray a small amount of corn powder for a test. Finally, wipe corn powder clean. Corn powder can absorb all the dirt adsorbed on the wooden door surface, making the paint surface smooth and bright.
5. White or light wooden doors turn yellow
The white or light paint on the surface of wooden doors will change color for a long time. You can use a rag with toothpaste to wipe it.
6. Protect hardware accessory
Just wipe gently with a dry cloth, and do not use detergent containing chemicals.
7. Clear the sticky paper
Use salad oil to completely soak the paper. After a few minutes, use steel wool for wooden doors to gently wipe it according to the direction of wood grain. Polish after drying.
Chongqing kunxiu wooden door: remove the oil and ink on the wooden door
Wooden door decoration effect diagram
8. Fade burn marks
Cigarette butts or unextinguished matches leave gas mark on the paint surface of wooden doors. If the paint surface is burnt, you can wrap a fine-grained hard cloth on the matchstick or toothpick, gently wipe the marks, and then apply a thin layer of wax, gas mark can fade.
9. Scratch
If the paint surface of the wooden door is scratched and the wood under the paint is not touched, crayon or paint of the same color as the wooden door can be applied to the wound surface of the wooden door to cover the exposed background color, then apply a thin layer of transparent nail polish.
10. Removal of Styrofoam
It is common for solid wood door to have extra Styrofoam stuck on the surface during the installation process of solid wood door. Once you accidentally put Styrofoam on the surface of the wooden door, remember not to rush to wipe off the Styrofoam immediately, don't worry about it first. After Styrofoam is completely cured, just use hand lever to buckle it down without leaving obvious marks. Otherwise, the more you wipe, the more sticky it is everywhere, it's a mess.
I believe that as long as your wooden door is not substantially damaged, you can still save it! So quickly collect these little tricks provided by Xiao Bian!
Editor: China Door Industry Network-dog thief
