At present, the common wooden doors in the market mainly include solid wood door, solid decorative doors and plywood door. Solid wood door is a door made of solid wood processing, which has the characteristics of stable performance and not easy to deform, giving people a steady and elegant feeling.
During the market interview, the reporter found that the price of wooden doors in the market was very different due to the factors affecting the price related to materials, paint, labor, processing technology, etc, from 800 yuan/Set to 5000 yuan/set. Relevant experts pointed out that the cost of doors has gradually become an important expense in home decoration. Consumers should not only consider the price factor, but also pay attention to the quality of doors when purchasing doors.
At present, the common wooden doors in the market mainly include solid wood door, solid decorative doors and plywood door. Solid wood door is a door made of solid wood processing, which has the characteristics of stable performance and not easy to deform, giving people a steady and elegant feeling. When purchasing solid wood door, first check the water content indicated in the manual. If it is in the south, the water content should be about 18%; If it is in the north, the water content should be about 12%. In addition, it depends on whether the external processing is fine. Under normal circumstances, you should not feel the "thorn hand" when touching. The glass frame processing of semi-glass and full glass doors should be accurate and the closing-in line should be complete.
Solid decorative door has the characteristics of rich styles, fire prevention and flame retardant, heat preservation, sound insulation effect and so on, and the price is relatively cheap. Buy solid decorative doors, the filler in the door leaf should be full, the wood strip of the door edge planing and repair should be firmly connected with inner frame, the decorative panel and the frame should be firmly bonded, and there is no phenomenon such as curling and cracks, the board surface should also be smooth and clean, without scarring, insect attack or crack, with clear wood grain and beautiful texture.
Plywood decorative door has light quality, low price, good decorative effect, and is simple and light to use. When purchasing, pay attention to whether the connection between the panel and the door frame is firm, and there should be no curling cracks and other phenomena. Inner frame the arrangement of horizontal and vertical keel meets the design requirements, and there should be horizontal keel at the installation hinge, the thickness of the Board shall not be less than 3mm, and it shall be smooth and clean without scarring, insect attack or crack.
In home life, doors are used frequently and easily damaged. However, if you can use more brains and master some tricks in use and maintenance at ordinary times, the breakage rate of doors can be reduced.
The relevant person in charge of Meixin door industry told the reporter that when removing stains on the surface of wooden doors, it is easy to scratch the surface with hard cloth, which should be wiped with soft cotton cloth. When the stain is too heavy, you can use neutral cleaning agent, toothpaste or furniture special cleaning agent to remove the stain and then dry wipe. "Do not place the cloth soaked with neutral reagent or moisture on the surface of the wooden door for a long time, otherwise it will soak the surface and change the surface finishing material color or peel off. Do not rub the corners of the wooden door too much, otherwise the paint will fall off. Hinge and lock are frequently moving accessories. When loosening occurs, they should be tightened immediately. The sound of hinge position should be filled with oil in time. When the lock is not flexible, a proper amount of pencil leads foam can be added to the keyhole, do not fill oil casually."
The door of the home often needs to be switched. When the door is opened, it often hits the wall directly. After a long time, the lock box and handle on the door are easy to touch marks on the wall, damaging the wall and door, it affects the appearance. In order to avoid this kind of collision, you can find a piece of rubber block which is about 5cm thick or nail a thick rubber on the small wooden block, and nail it on the door side against the hinge side, which will not make the door, the window is damaged.
In addition, if the door in the home is easy to be blown open by the wind after closing, it is inconvenient and unsafe. You can find a strong magnet of appropriate size, which is buried flat above the door frame at about 1/4 of the height of the door, then, nail a piece of iron sheet on the place where the door leaf matches the door frame, and make it absorb each other after closing the door, which can prevent the door from being blown open by the wind.
Editor: China Door Industry Network-dog thief
