Think about our own clothes. If we tie our buttons wrong, the beautiful clothes will not show its true uniqueness, so we need to be outstanding, we need to keep improving the overall craftsmanship. What kind of installation is the most perfect treatment? Today, we will tell you how to judge whether our home decoration is fine, how can we show all the charm of wooden doors.
From the installation details of the wooden door, the door leaf will look relatively flat after installation. The display form is vertical display, and there is no abnormal sound when the wooden door is opened, it is flexible and comfortable to open. The gap between door set and the door is usually about 6mm. The other three sides are 2mm, and the tolerance is between 0.5mm. When closing the wooden door, it can be quietly combined with the sealing strip without any swing, which shows that the door leaf we installed is qualified and there should be no problem in the details, in this way, no other series of problems can occur during construction. Of course, the installation of door set also needs to be tight and flat, with three-dimensional horizontal and vertical tolerance not exceeding the specified range, only in this way can we ensure that there will be no black seam. Styrofoam should also be evenly applied and can be smooth during cutting.
When the wooden door is installed, the door cover line of the wooden door is also a problem that cannot be ignored. The glue needs to be evenly applied, and the door cover and the Wall need to be fixed, just like the door cover, it needs to be flat and tight, it cannot be caused by gaps. The sleeve wire on the same side must be connected in the same plane. Do not cause the interface of sleeve wire to be uneven due to light body.
Usually, in the allowable error, the gap between door casing and the wall must be handled properly, and what needs attention is the installation of hardware. The slotting of the door lock and the door cover need to be neat and standardized, the size of the lock cylinder needs to be consistent with that of the lock cylinder. The hinge and door stopper are the same. They need to be installed on the established position and fixed to avoid loosening and falling off in future use, it is also necessary to pay attention to whether the locks are handiness freely and see if there are other problems.
Editor: China Door Industry Network-dog thief
