Wooden doors with good weight should not be too light. Compared with several wooden doors of the same specifications and the same surface materials, it is hard to say that wooden doors with too light weight are high-quality wooden doors. The reason why the weight is too light is that the material of the selected core material is relatively soft (for example, Poplar), and the pipes and pores in the wood are relatively large. Or there are too few core materials inside, which makes the wooden door not strong enough. The strength and impact resistance of this kind of wooden door are relatively poor, and the sound insulation effect is not good either.
Look at the appearance of high quality wooden doors, the paint surface is full and smooth, rich and natural, the film transparency is good, the texture of the surface material is clear and realistic, and the physical appearance is clear and clear. The paint film of inferior wooden doors is dry and obscure, with more exposed paint, bubbling, pinholes, ripples, particles, etc. The paint film has poor transparency, blurred surface texture, and obscure wood appearance. The reason why inferior wooden doors are so, on the one hand, is that the quality of the paint selected by manufacturers is poor, and the process and equipment are not closed; On the other hand, the wood skin Selected has many defects, so the transparency of the coating is deliberately reduced, to cover sound knot, holes, decay, discoloration, cracks, indentation and other defects on the surface.
Look at the veneer or solid wood splicing place, the veneer or solid wood splicing place of the high quality wooden door is processed with fine processing, and no trace of combination can be seen. The veneer or solid wood splicing of inferior wooden doors is obvious, and there are even cracking and dislocation phenomena.
Looking at the flatness of wooden doors, high-quality wooden doors have strict requirements on material selection, process control and factory inspection, and the surface of finished wooden doors is flat and straight. The appearance is perfect after installation. Inferior wooden doors have low requirements on materials, technology and inspection, and the warpage of finished wooden doors is relatively large. After installation, it is obvious that wooden doors and door frames cannot be aligned neatly.
Editor: China integrated kitchen Network-dog thief
