1. How to choose wooden doors? The types of wooden doors can be divided into: solid wood composite door, solid wood veneer door, pure solid wood door
1. Solid wood composite door: use dense plate holder wooden keel, surface veneer or wood grain material, paint, made of more than three kinds of materials composite processing, performance is relatively stable, low cost price.
⒉ solid wood veneer door: The exterior adopts 3mm solid wood panel, the interior is all solid wood material, the surface is made of high-grade paint, the performance is stable, the texture is good, and the cost is in the price.
Pure solid wood door: door body both inside and outside are made of solid wood, and the surface is treated with high-grade paint. It is a high-grade product with high cost.
In addition to the distinction between types of wooden doors, more attention should be paid to the selection of Wood:
Common Wood produced on the market include Zhuomu, autumn Wood, beech, Korean pine, cold spruce, oak, golden teak, etc. All the above wood species belong to hard Miscellaneous Wood.
Zhuo mu, Qiu Mu, fir, beech and Pinus koraiensis are relatively low-grade hard Miscellaneous wood with low price.
Cold spruce, oak, golden teak are medium and high grade wood with stable performance, not easy to crack and deform, and medium price.
Due to the difference between technology and raw materials, there are many kinds of wooden door prices in the market. Therefore, when choosing wooden door products, we should identify the technology and materials and compare the prices so as to choose satisfactory products.
II. How to choose steel and wood suit inner door?
Steel and wood wood composite door, because the exterior adopts steel plate shaping, the interior is wooden keel, and the surface is made of wood grain, so that the product has the advantages of no deformation, no cracking, no pollution, long service life, etc, it has become a widely used product in decoration.
However, when selecting such products, you should pay attention to the following points:
1. Surface treatment process: the surface treatment process on the market is mainly divided into two categories;
(1). Film pasting process: pvc material (remolding) with imitation wood grain is pasted on the surface of the steel plate, and its manufacturing process is over-heat adhesive. During the use process, due to hot and cold changes, degumming, layering, leg color and other phenomena.
(2). Transfer paint process: Select the bottom surface spray treatment on the surface of the steel plate & rarr; Baking & rarr; Transfer wood grain and heat to the Steel Plate & rarr; Baking & rarr; The surface adopts automobile paint process. In this way, the above problems are avoided and the performance is relatively stable.
There are three types of door frame materials:
(1). Multi-layer board door set: multi-layer board film (pvc) or sticker paint: due to the laminating process on its surface, it is easy to fall off, delaminate and blister between the veneer and the board in humid and dry environment, uneven, anaerobic bacteria will be generated between the veneers and the plates during normal use, which will deform the materials and affect the use and appearance.
(2). Density plate door set: density plate surface stickers are mainly used to paint or paste PVC film. Because density plate is made of straw fiber and glue, it is made by high pressure, so it will expand, mildew, deformation, after expansion, its density is greatly reduced, thus affecting the grip strength and service life.
(3). Steel and wood door set: it adopts the same manufacturing process as the door leaf. Door set has no color difference with the door leaf, and is formed by steel plate clamp wooden keel. The surface adopts the transfer printing baking paint process, so as to achieve the best use of the product. No deformation, no cracking, moisture proof, heat proof, no pollution.
Steel plate thickness: due to the diversification of market prices, the thickness of steel plates is also different. To achieve this kind of products, the surface is smooth, smooth and stable after production, generally, the thickness of the steel plate should reach 0.6mm, and the anti-collision and impact resistance of the door can achieve good results. When we choose such products, we must compare the quality with the price, so as not to affect the future use and appearance due to quality problems.
Editor: Chinese door and window net-dog thief
